HexControllerV3 larger
TH4R4V3N1324·hexapod-controller·controller/schematic/hexControllerV3/hexControllerV3_larger.kicad_pcb
About the HexControllerV3 larger PCB
HexControllerV3 larger is an open source ESP32 PCB design by TH4R4V3N1324, published on GitHub. It is a 4-layer board measuring 141 × 78.5 mm, with 48 components from 28 distinct parts.
Its main chip is the ESP32-S2-MINI-1-N4R2, from the ESP32 family. Other key parts include the IP5306 and AMS1117-3.3. By type, the board carries 13 capacitors, 8 switches, 8 resistors, 7 connectors, 5 LEDs and 4 ICs.
It belongs with the sensors, iot & wireless and displays & leds designs in this gallery.
From the project
Embedded firmware and hardware-support code for a hexapod robot controller. The repository contains firmware for the handheld/controller interface, an ESP32 wireless receiver, ATtiny1616 left and right boards, and a newer ESP32-S3/LVGL controller implementation.
Embedded firmware and hardware-support code for a hexapod robot controller. The repository contains firmware for the handheld/controller interface, an ESP32 wireless receiver, ATtiny1616 left and right boards, and a newer ESP32-S3/LVGL controller implementation.
The system is primarily written in C/C++ and uses PlatformIO, Arduino, and ESP-IDF. Communication is built around ESP-NOW for wireless control packets and I²C for exchanging controller and robot-state data.
Main components on the HexControllerV3 larger
HexControllerV3 larger bill of materials (BOM)
48 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S2-MINI-1-N4R2 | ESP32S2MINI1N4R2 | IC1 |
| 1 | IP5306 | SOIC127P600X165-9N | IC2 |
| 1 | ~ | WaveShare_2.42inch_SSD1309_OLED | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 2 | Battery | 14500 battery holder | J2, J7 |
| 1 | Switch1 | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Switch2 | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Switch3 | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Switch4 | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 2 | TS-1088-AR02016 | TS1088AR02016 | S1, S2 |
| 1 | RotaryEncoder_Switch | PEC11L4120FS0020 | SW1 |
| 5 | SW_DIP_x01 | DTS62NV | SW2, SW3, SW4, SW5, SW6 |
| 2 | COM-16273 | COM16273 | VR1, VR2 |
| 5 | KP-1608SURCK ~ | KP1608SURCK | LED1, LED2, LED3, LED4, LED5 |
| 1 | XAL4020-102MEC 1uH | XAL40XX | L1 |
| 1 | TCJB226M025R0150E 22uF | CAPPM3528X210N | C1 |
| 1 | TAJA106K016RNJ 10uF | CAPPM3216X180N | C2 |
| 6 | CL21A226MAQNNNE 22uF | CAPC2012X140N | C3, C10, C11, C12, C13, C14 |
| 2 | CC0805KRX7R9BB104 100nF | CAPC2012X95N | C4, C6 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CL21B105KBFNNNE 1uF | CAPC2012X135N | C5 |
| 2 | 10uF | C_0805_2012Metric | C8, C9 |
| 2 | 10k | R_0805_2012Metric | R1, R8 |
| 1 | 100R | R_0805_2012Metric | R2 |
| 2 | 5.1k | R_0805_2012Metric | R3, R4 |
| 1 | 2R | R_0805_2012Metric | R5 |
| 1 | 0.5R | R_0805_2012Metric | R6 |
| 1 | 20R | R_0805_2012Metric | R7 |
HexControllerV3 larger design files
The KiCad project lives in the TH4R4V3N1324/hexapod-controller repository on GitHub; these links point at the commit this page was built from.
HexControllerV3 larger: common questions
What microcontroller does the HexControllerV3 larger use?
The HexControllerV3 larger is built around the ESP32-S2-MINI-1-N4R2, from the ESP32 family.
How big is the HexControllerV3 larger PCB?
The HexControllerV3 larger measures 141 × 78.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the HexControllerV3 larger?
48 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the HexControllerV3 larger design files?
From the TH4R4V3N1324/hexapod-controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the HexControllerV3 larger design in my own project?
The repository has no license, so all rights stay with TH4R4V3N1324. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the HexControllerV3 larger without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in hexapod-controller
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k