TGC-Core-2040-v2

ThatGuyCodes605·TGC-Core-2040-v2

TGC-Core-2040-v2 PCB layout, top view — open source RP2040/RP2350 board by ThatGuyCodes605

About the TGC-Core-2040-v2 PCB

TGC-Core-2040-v2 is an open source RP2040/RP2350 PCB design by ThatGuyCodes605, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 30.2 × 53.2 mm, with 32 components from 17 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the AMS1117-3.3 and W25Q128JVS. By type, the board carries 16 capacitors, 7 resistors, 3 ICs, 3 connectors, 1 crystal and 1 switch.

It belongs with the iot & wireless, sensors and dev boards & breakouts designs in this gallery.

From the project

A Raspberry-PI-Pico-Like devboard based around the RP2040 microcontroller

This repository contains the complete set of KiCad EDA files (version 10.0) necessary to view, modify, and manufacture the printed circuit board (PCB).

Based on the schematic and board layout, this board includes the following integrated components and capabilities:

Microcontroller: Pico-compatible architecture featuring a built-in Temperature Sensor for internal environmental monitoring. Wireless Connectivity: Integrated Wi-Fi (802.11n) and Bluetooth (Classic & BLE), making it perfectly suited for IoT nodes, remote telemetry, and wireless control. Modern Interface: Upgraded with a USB…

TGC-Core-2040-v2, from the project README
From the project README

Main components on the TGC-Core-2040-v2

TGC-Core-2040-v2 bill of materials (BOM)

32 components, 17 distinct parts.

QtyPartRefs
1
RP2040
U1
1
AMS1117-3.3
U2
1
W25Q128JVS
U3
1
ABM8-272-T3
Y1
2
Conn_01x18
J2, J3
1
USB_C_Plug_USB2.0
P1
1
SW_Push
SW1
1
LED
D1
2
1uF
C1, C9
10
100nF
C2, C3, C4, C5, C6, C7, C8, C10 +2
2
10uF
C12, C15
2
15p
C13, C14
2
27.4Ω
R1, R2
1
5.1K
R3
1
220R
R4
2
1k
R5, R7
1
DNF
R6

TGC-Core-2040-v2 design files

The KiCad project lives in the ThatGuyCodes605/TGC-Core-2040-v2 repository on GitHub; these links point at the commit this page was built from.

TGC-Core-2040-v2: common questions

What microcontroller does the TGC-Core-2040-v2 use?

The TGC-Core-2040-v2 is built around the RP2040, from the RP2040/RP2350 family.

How big is the TGC-Core-2040-v2 PCB?

The TGC-Core-2040-v2 measures 30.2 × 53.2 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the TGC-Core-2040-v2?

32 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the TGC-Core-2040-v2 design files?

From the ThatGuyCodes605/TGC-Core-2040-v2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the TGC-Core-2040-v2 design in my own project?

Yes, under the terms of its GPL-3.0 license, which ThatGuyCodes605 chose for the repository.

Can I test firmware for the TGC-Core-2040-v2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards