PedalPiV2
About the PedalPiV2 PCB
PedalPiV2 is an open source PCB design by thawney, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 72.4 × 91.4 mm, with 47 components from 26 distinct parts.
Other key parts include the MCP6002 and MCP3002. By type, the board carries 16 capacitors, 14 resistors, 4 switches, 2 ICs, 2 connectors and 1 diode.
It belongs with the audio designs in this gallery.
From the project
Pedal Pi V2 by Thawney is an all new and regularly maintained Pedal-Pi by electrosmash; a lo-fi programmable guitar pedal that works with the Raspberry Pi ZERO Board. My repository contains all of the information needed to create your own board from scratch unlike Pedal Pi who only share effect code.
Main components on the PedalPiV2
PedalPiV2 bill of materials (BOM)
47 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP6002 | DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | MCP3002 | DIP-8_W7.62mm_Socket_LongPads | U2 |
| 1 | Guitar_IN | StereoJack-NYS216_2 | J1 |
| 1 | OUTPUT | StereoJack-NYS216_2 | J2 |
| 1 | 1V6 TP | SolderWirePad_single_1mmDrill | +1V6 |
| 1 | 3V3 TP | SolderWirePad_single_1mmDrill | +3v3 |
| 1 | 5V TP | SolderWirePad_single_1mmDrill | +5v |
| 4 | CONN_10pins | Pin_Header_Straight_1x10_Pitch2.54mm | CONN1, CONN2, CONN3, CONN4 |
| 1 | 500K | Potentiometer_Trimmer_ACP_CA6h_Vertical | RV1 |
| 1 | SWITCH_3PDT | 3PDTswitch | SW1 |
| 2 | SW_PUSH | Switch2 | SW2, SW3 |
| 1 | SWITCH_INV | Switch | SW4 |
| 1 | LED | LED_D3.0mm | D3 |
| 1 | 0.1u | C_Rect_L7.0mm_W2.0mm_P5.00mm | C1 |
| 5 | 6n8 | C_Rect_L7.0mm_W2.0mm_P5.00mm | C2, C4, C6, C7, C8 |
| 2 | 4.7u | CP_Radial_D5.0mm_P2.50mm | C3, C9 |
| 1 | 270p | C_Rect_L7.0mm_W2.0mm_P5.00mm | C5 |
| 2 | 100n | C_Rect_L7.0mm_W2.0mm_P5.00mm | C10, C15 |
| 4 | 220u | CP_Radial_D8.0mm_P3.50mm | C11, C12, C13, C14 |
| 1 | 4.7u | CP_Radial_Tantal_D5.0mm_P2.50mm | C16 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R0, R1 |
| 6 | 4K7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R6, R9, R10, R13, R14 |
| 2 | 4.7K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R15 |
| 2 | 100K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R11 |
| 1 | 300K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 50K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12 |
PedalPiV2 design files
The KiCad project lives in the thawney/PedalPiV2 repository on GitHub; these links point at the commit this page was built from.
PedalPiV2: common questions
How big is the PedalPiV2 PCB?
The PedalPiV2 measures 72.4 × 91.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PedalPiV2?
47 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the PedalPiV2 design files?
From the thawney/PedalPiV2 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PedalPiV2 design in my own project?
Yes, under the terms of its GPL-3.0 license, which thawney chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687