Tarea Final

ThaysNivar·Electiva-TN·Tarea Final/Diseño-PCB/Tarea Final.kicad_pcb

Tarea Final PCB layout, top view — open source ESP32 board by ThaysNivar

About the Tarea Final PCB

Tarea Final is an open source ESP32 PCB design by ThaysNivar, published on GitHub. It is a 2-layer board measuring 113 × 125.7 mm, with 19 components from 16 distinct parts.

Its main chip is the ESP32-DEVKITC-32D, from the ESP32 family. Other key parts include the LM2596S-ADJ. By type, the board carries 6 connectors, 5 capacitors, 2 ICs, 2 diodes, 2 resistors and 1 inductor.

From the project

Repositorio Diseño Mecatronico Thays Nivar 2022-0459

Main components on the Tarea Final

Tarea Final bill of materials (BOM)

19 components, 16 distinct parts.

QtyPartRefs
1
ESP32-DEVKITC-32D
U1
1
LM2596S-ADJ
U2
1
Conn_01x19_Socket
J1
1
Conn_01x19_Socket
J2
1
Conn_01x19_Pin
J3
1
Conn_01x19_Pin
J4
1
ENTRADA
J5
1
SALIDA
J6
1
10KΩ
RV1
1
SM4001
D1
1
B340
D2
1
33uH
L1
1
200uF
C1
3
106uF
C2, C3, C4
1
220uF
C5
2
R
R1, R2

Tarea Final design files

The KiCad project lives in the ThaysNivar/Electiva-TN repository on GitHub; these links point at the commit this page was built from.

Tarea Final: common questions

What microcontroller does the Tarea Final use?

The Tarea Final is built around the ESP32-DEVKITC-32D, from the ESP32 family.

How big is the Tarea Final PCB?

The Tarea Final measures 113 × 125.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Tarea Final?

19 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Tarea Final design files?

From the ThaysNivar/Electiva-TN repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Tarea Final design in my own project?

The repository has no license, so all rights stay with ThaysNivar. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Tarea Final without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Electiva-TN

Similar boards