PicoMod Eject
The-Faulty·PicoMod·PicoMod Eject/PicoMod Eject.kicad_pcb
About the PicoMod Eject PCB
PicoMod Eject is an open source PCB design by The-Faulty, published on GitHub. It is a 2-layer board measuring 20 × 27 mm, with 47 components from 24 distinct parts.
Other key parts include the BMP388, LSM6DSMTR and LIS3MDL. By type, the board carries 11 resistors, 9 test points, 9 capacitors, 5 connectors, 4 ICs and 3 diodes.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
RP2040 compute board with high density connectors
Main components on the PicoMod Eject
PicoMod Eject bill of materials (BOM)
47 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BMP388 | PQFN50P200X200X80-10N | U1 |
| 1 | LSM6DSMTR | PQFN50P300X250X86-14N | U2 |
| 1 | LIS3MDL | LGA-12_2x2mm_P0.5mm | U3 |
| 1 | ~ | LDL212PU-5V-Regulator | U4 |
| 2 | Motor_Servo | 1x3-Servo-Connector-1.2x2mm | M1, M2 |
| 1 | NMOS | MOSFET_SI8406DB-T2-E1 | Q1 |
| 1 | ~ | SOT-323_SC-70 | Q2 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10104110_Horizontal | J1 |
| 2 | Conn_02x15_Top_Bottom | TE-3-2363962-0_30x0.4mm_Recepticle | J2, J3 |
| 2 | Conn_01x02 | TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J4, J5 |
| 2 | SW_Push | PTS815 SJM 250 | SW1, SW2 |
| 9 | TestPoint | TestPoint_Loop_1.6x0.8mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +1 |
| 2 | LED | LED_0603_1608Metric | D1, D2 |
| 1 | D | D_SOD-523 | D3 |
| 6 | 100n | C_0603_1608Metric | C1, C2, C3, C4, C5, C6 |
| 2 | 1u | C_0603_1608Metric | C7, C8 |
| 1 | 4.7u | C_0603_1608Metric | C9 |
| 2 | 470 | R_0402_1005Metric | R1, R6 |
| 1 | 470 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 100k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 180k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4 |
| 3 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R9, R11 |
| 2 | 10k | R_0603_1608Metric | R7, R10 |
| 1 | 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
PicoMod Eject design files
The KiCad project lives in the The-Faulty/PicoMod repository on GitHub; these links point at the commit this page was built from.
PicoMod Eject: common questions
How big is the PicoMod Eject PCB?
The PicoMod Eject measures 20 × 27 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PicoMod Eject?
47 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the PicoMod Eject design files?
From the The-Faulty/PicoMod repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PicoMod Eject design in my own project?
The repository has no license, so all rights stay with The-Faulty. Use it as a reference, and ask the author before reusing the design.
More boards in PicoMod
RP2040/RP2350
PicoModR3
The-Faulty
20 × 20 mm39 parts2LNo license0RP2040/RP2350
RP2040 Quicc MCU 4Layer
The-Faulty
20 × 20 mm36 parts4LNo license0RP2040/RP2350
RP2040 Quicc MCU With Labels
The-Faulty
20 × 20 mm34 parts2LNo license0RP2040/RP2350
RP2040 Quicc MCU BeforeOSH
The-Faulty
20.1 × 20 mm31 parts2LNo license0PicoMod Breakout.stretch bkup
The-Faulty
28.1 × 38.3 mm29 parts2LNo license0PicoMod Breakout
The-Faulty
28.1 × 38.3 mm29 parts2LNo license0
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979