7 open source boards using the LSM6DSMTR
Real designs built with the LSM6DSMTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
ArtDecoEarrings
sawaiz
38.9 × 6.6 mm17 parts2LNo license18STM32
2425 Projet2A Ingenuity
penelopehnr
65 × 30 mm33 parts4LNo license2STM32
Shoulder
kristblo
88 × 88 mm85 parts4LNo license0RP2040/RP2350
Simple-FC
someonelse20
40 × 40 mm72 parts4LMIT0PicoMod Eject
The-Faulty
20 × 27 mm47 parts2LNo license0STM32
Hand
kristblo
55.5 × 91 mm74 parts4LNo license0Imu
kristblo
38 × 38 mm16 parts2LNo license0
How designs wire the LSM6DSMTR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LSM6DSMTR connects to, and the resistors, capacitors and other passives placed on it.
- The VDDIO pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
- The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
- The OCS_AUX pin is left unconnected on 5 of 5 designs.
- The SDO_AUX pin is left unconnected on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INT1pin 4 | Connected to: Not connected 60% · a signal 40% | — |
| VDDIOpin 5 | Connected to: 3.3V 100% |
|
| GNDpin 6, 7 | Connected to: GND 100% | — |
| VDDpin 8 | Connected to: 3.3V 100% |
|
| INT2pin 9 | Connected to: Not connected 60% · a signal 40% | — |
| OCS_AUXpin 10 | Connected to: Not connected 100% | — |
| SDO_AUXpin 11 | Connected to: Not connected 100% | — |
| SCLpin 13 | Connected to: The microcontroller 80%, a connector 40% |
|
| SDApin 14 | Connected to: The microcontroller 80%, a connector 40% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ArtDecoEarrings by sawaiz, 2425 Projet2A Ingenuity by penelopehnr, Hand by kristblo and Simple-FC by someonelse20.
The LSM6DSMTR in open source designs
The gallery holds 7 open source boards using the LSM6DSMTR from 5 GitHub repositories; a typical one measures about 40 × 38 mm and carries around 47 components.
57% use four copper layers or more, and 14% carry an open source license.
The most starred is ArtDecoEarrings by sawaiz.
Microcontrollers on boards using the LSM6DSMTR
What boards using the LSM6DSMTR are built for
LSM6DSMTR: common questions
Where can I find a LSM6DSMTR reference design?
Each of the 7 boards on this page is a real design using the LSM6DSMTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LSM6DSMTR VDDIO pin?
The VDDIO pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the LSM6DSMTR.
What decoupling capacitors do designs use on the LSM6DSMTR VDD pin?
The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the LSM6DSMTR.
How is the LSM6DSMTR OCS_AUX pin connected?
The OCS_AUX pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the LSM6DSMTR.
Which microcontrollers do boards using the LSM6DSMTR use?
Most are built on STM32 (3), AVR/Arduino (1) and RP2040/RP2350 (1).
How big is a typical board using the LSM6DSMTR?
The median is 40 × 38 mm, and 43% are two-layer designs.
What is the most popular open source board using the LSM6DSMTR?
By GitHub stars, ArtDecoEarrings by sawaiz, with 18 stars.
Can I simulate one of these boards using the LSM6DSMTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.