ILI9341 ESP32 MAIN
theBrutzler·ILI9341_DMG_01·ILI9341_ESP32/ILI9341_ESP32_MAIN.kicad_pcb
About the ILI9341 ESP32 MAIN PCB
ILI9341 ESP32 MAIN is an open source ESP32 PCB design by theBrutzler, published on GitHub. It is a 2-layer board measuring 129.1 × 81 mm, with 75 components from 21 distinct parts.
Its main chip is the ESP32-WROVER-E-N8R8, from the ESP32 family. Other key parts include the PAM8406D and DZ200S-22-14-64. By type, the board carries 29 resistors, 16 capacitors, 10 switches, 4 transistors, 4 LEDs and 3 ICs.
It belongs with the retro computing designs in this gallery.
From the project
GESP Mainboard for ORIGINAL GAMEBOY
Main components on the ILI9341 ESP32 MAIN
ILI9341 ESP32 MAIN bill of materials (BOM)
75 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROVER-E-N8R8 | WIFI-SMD_ESP32-WROVER-IE8MB | U3 |
| 1 | PAM8406D | SOP-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | DZ200S-22-14-64 | HDR-SMD_14P-P2.00-V-M-R2-C7-LS6.4 | U8 |
| 2 | BC817 | SOT-323_SC-70 | Q2, Q8 |
| 2 | PMOS | SOT-323_SC-70 | Q3, Q7 |
| 1 | Micro_SD_Card_CD | MicroSD_Self_ bomb | J5 |
| 1 | Conn_01x18_Socket | solder connector 0.8mm 18 pin | J6 |
| 1 | Speaker | PinHeader_1x02_P2.54mm_Vertical | LS1 |
| 10 | SW_Push | RubberpadButton_250µ_250µ | SW2, SW3, SW4, SW5, SW6, SW7, SW9, SW10 +2 |
| 4 | WS2812B-MINI | LED-SMD_4P-L3.5-W3.5-TL_WS2812B | LED1, LED2, LED3, LED4 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 2 | D | Nexperia_CFP3_SOD-123W | D11, D12 |
| 3 | FerriteBead_Small | L_0805_2012Metric | FB1, FB2, FB3 |
| 2 | 470µ | CP_EIA-7343-43_Kemet-X | C5, C30 |
| 10 | 4µ7 | C_1206_3216Metric | C6, C7, C9, C14, C17, C18, C20, C26 +2 |
| 2 | 100n | C_0603_1608Metric | C12, C13 |
| 2 | 220p | C_0603_1608Metric | C15, C16 |
| 21 | 5K1 | R_0603_1608Metric | R1, R10, R11, R14, R16, R17, R18, R19 +13 |
| 6 | 100K | R_0603_1608Metric | R3, R8, R23, R35, R36, R46 |
| 1 | 4R7 | R_0603_1608Metric | R28 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 22 | R_0603_1608Metric | R42 |
ILI9341 ESP32 MAIN design files
The KiCad project lives in the theBrutzler/ILI9341_DMG_01 repository on GitHub; these links point at the commit this page was built from.
ILI9341 ESP32 MAIN: common questions
What microcontroller does the ILI9341 ESP32 MAIN use?
The ILI9341 ESP32 MAIN is built around the ESP32-WROVER-E-N8R8, from the ESP32 family.
How big is the ILI9341 ESP32 MAIN PCB?
The ILI9341 ESP32 MAIN measures 129.1 × 81 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ILI9341 ESP32 MAIN?
75 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ILI9341 ESP32 MAIN design files?
From the theBrutzler/ILI9341_DMG_01 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the ILI9341 ESP32 MAIN design in my own project?
The repository has no license, so all rights stay with theBrutzler. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ILI9341 ESP32 MAIN without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in ILI9341_DMG_01
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k