14 open source boards using the PAM8406D

Real designs built with the PAM8406D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

14 boardsClear filters|Most starred

How designs wire the PAM8406D

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the PAM8406D connects to, and the resistors, capacitors and other passives placed on it.

  • The VREF pin has a capacitor to GND on 9 of 9 designs, most often 1 µF (then 4.7 µF).
  • The PVDDL pin has a decoupling capacitor on 8 of 9 designs, most often 1 µF (then 10 µF).
  • The VDD pin has a decoupling capacitor on 8 of 9 designs, most often 1 µF (then 10 nF).
  • The INL pin has a series resistor on 8 of 9 designs, most often 10 kΩ (then 47 kΩ).
+OUT_Lpin 1Connected to: Signal 100%
  • Ferrite bead on 44%
PGNDLpin 2Connected to: GND 100%
-OUT_Lpin 3Connected to: Signal 100%
  • Ferrite bead on 44%
PVDDLpin 4Connected to: 5V 89%
  • Decoupling capacitor on 89% · 1 µF (8), 10 µF (4), 4.7 µF (2)
MUTEpin 5Connected to: Signal 67% · not connected 22%
  • Pull-up to 5V on 33% · 0 Ω (3)
VDDpin 6Connected to: 3.3V 56% · a signal 44%
  • Decoupling capacitor on 89% · 1 µF (7), 10 nF (3), 4.7 µF (2)
  • Ferrite bead on 44%
INLpin 7Connected to: Signal 100%
  • Series resistor on 89% · 10 kΩ (6), 47 kΩ (1), 270 kΩ (1)
VREFpin 8Connected to: Signal 100%
  • Capacitor to GND on 100% · 1 µF (8), 4.7 µF (1)
MODEpin 9Connected to: Signal 56% · 3.3V 44%
  • Pull-up to 5V on 44% · 0 Ω (3), 10 kΩ (1)
  • Capacitor to GND on 33% · 1 µF (2), 10 µF (1), 100 nF (1)
INRpin 10Connected to: Signal 100%
  • Series resistor on 89% · 10 kΩ (6), 47 kΩ (1), 270 kΩ (1)
GNDpin 11Connected to: GND 100%
SHNDpin 12Connected to: Signal 56% · not connected 22% · 5V 22%
  • Pull-up to 5V on 33% · 0 Ω (3)
  • Capacitor to GND on 33% · 4.7 µF (2), 10 µF (2), 470 µF (1)
PVDDRpin 13Connected to: 5V 89%
  • Decoupling capacitor on 89% · 1 µF (7), 10 µF (5), 4.7 µF (2)
-OUT_Rpin 14Connected to: A connector 22%
  • Ferrite bead on 67%
PGNDRpin 15Connected to: GND 100%
+OUT_Rpin 16Connected to: A connector 22%
  • Ferrite bead on 78%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Elec RPI Robot HAT by pollen-robotics, The 4DS by Astronuat21, 260321 by McbeEringi and ILI9341 ESP32 by theBrutzler.

The PAM8406D in open source designs

The gallery holds 14 open source boards using the PAM8406D from 9 GitHub repositories; a typical one measures about 65 × 74.9 mm and carries around 82 components.

57% are two-layer designs, the rest use four layers or more, and 64% carry an open source license.

The most starred is Elec RPI Robot HAT by pollen-robotics.

Microcontrollers on boards using the PAM8406D

PAM8406D: common questions

Where can I find a PAM8406D reference design?

Each of the 14 boards on this page is a real design using the PAM8406D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the PAM8406D VREF pin connected?

The VREF pin has a capacitor to GND on 9 of 9 designs, most often 1 µF (then 4.7 µF). Counted from the KiCad layouts of 9 open source designs using the PAM8406D.

What decoupling capacitors do designs use on the PAM8406D PVDDL pin?

The PVDDL pin has a decoupling capacitor on 8 of 9 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the PAM8406D.

What decoupling capacitors do designs use on the PAM8406D VDD pin?

The VDD pin has a decoupling capacitor on 8 of 9 designs, most often 1 µF (then 10 nF). Counted from the KiCad layouts of 9 open source designs using the PAM8406D.

What parts are used alongside the PAM8406D?

The 74LVC1G08, AP63205, DNP-CAT24C32HU4, LM5050-1 and SN74LVC1G125DBV appear in the most repositories here.

Which microcontrollers do boards using the PAM8406D use?

Most are built on ESP32 (5), AVR/Arduino (3) and Raspberry Pi (1).

How big is a typical board using the PAM8406D?

The median is 65 × 74.9 mm, and 57% are two-layer designs.

What is the most popular open source board using the PAM8406D?

By GitHub stars, Elec RPI Robot HAT by pollen-robotics, with 108 stars.

Can I simulate one of these boards using the PAM8406D before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part