Potatopi2040
thejasonzhang·potatopi2040·rp2040devboard/rp2040devboard.kicad_pcb
About the Potatopi2040 PCB
Potatopi2040 is an open source RP2040/RP2350 PCB design by thejasonzhang, published on GitHub. It is a 2-layer board measuring 21.5 × 52 mm, with 33 components from 16 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1700X-330XXTT and W25Q16JVZPIQ TR. By type, the board carries 17 capacitors, 7 resistors, 4 connectors, 3 ICs, 1 crystal and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
handsoldered rp2040 devboard project
PotatoPi is a custom RP2040-based devboard that can be used for lots of cool hardware and software projects. It follows the same pinout as the Raspberry Pi Pico and is fully feature-compatible.
It will also include headers soldered on.
- Features - 16MB onboard flash memory - Convenient reset button for easy flashing - Custom PotatoPi artwork on both sides of the PCB - All components hand soldered (no PCBA)
Main components on the Potatopi2040
Potatopi2040 bill of materials (BOM)
33 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | MCP1700X-330XXTT MCP1700x-330xxTT | SOT-23 | U2 |
| 1 | W25Q16JVZPIQ TR | Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm | U3 |
| 1 | 12 MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 2 | CONN_01X20 Conn_01x20 | PinHeader_1x20_P2.54mm_Vertical | J2, J3 |
| 1 | CONN_01X03 Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 2 | 1UF 1uF | C_0402_1005Metric | C1, C12 |
| 11 | 0.1UF 0.1uF | C_0402_1005Metric | C2, C3, C4, C5, C6, C7, C8, C9 +3 |
| 2 | 10UF 10uF | C_0603_1608Metric | C13, C14 |
| 2 | 33PF 33pF | C_0603_1608Metric | C15, C16 |
| 2 | 5.1K | R_0402_1005Metric | R1, R2 |
| 2 | 27 | R_0402_1005Metric | R3, R4 |
| 2 | 1K | R_0402_1005Metric | R5, R6 |
| 1 | 10K | R_0402_1005Metric | R7 |
Potatopi2040 design files
The KiCad project lives in the thejasonzhang/potatopi2040 repository on GitHub; these links point at the commit this page was built from.
Potatopi2040: common questions
What microcontroller does the Potatopi2040 use?
The Potatopi2040 is built around the RP2040, from the RP2040/RP2350 family.
How big is the Potatopi2040 PCB?
The Potatopi2040 measures 21.5 × 52 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Potatopi2040?
33 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Potatopi2040 design files?
From the thejasonzhang/potatopi2040 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Potatopi2040 design in my own project?
The repository has no license, so all rights stay with thejasonzhang. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Potatopi2040 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k