FNMES-Technical-Guide

ThemisEfth·fNMES-Technical-Guide·dac_controller/dac_controller.kicad_pcb

FNMES-Technical-Guide PCB layout, top view — open source AVR/Arduino board by ThemisEfth

About the FNMES-Technical-Guide PCB

FNMES-Technical-Guide is an open source AVR/Arduino PCB design by ThemisEfth, published on GitHub under the MIT license. It is a 2-layer board measuring 58.5 × 44.2 mm, with 31 components from 26 distinct parts.

Its main chip is the Arduino_Uno_R3_SMD_Shield, from the AVR/Arduino family. Other key parts include the TMR-0521, LTC1257 and LM6172. By type, the board carries 11 capacitors, 7 resistors, 4 jumpers, 3 ICs, 3 connectors and 1 module.

It belongs with the displays & leds and dev boards & breakouts designs in this gallery.

From the project

This repository contains the Python script for a graphical user interface (GUI) designed to control electrical stimulators via Arduino boards.

This repository contains the Python script for a graphical user interface (GUI) designed to control electrical stimulators via Arduino boards, facilitating precise adjustment of electrical stimulation parameters. This repository accompanies the paper titled: Computer-controlled electrical stimulation of facial muscles by facial neuromuscular electrical stimulation (fNMES): Hardware and software solutions.

FNMES-Technical-Guide, from the project README
From the project README

Main components on the FNMES-Technical-Guide

FNMES-Technical-Guide bill of materials (BOM)

31 components, 26 distinct parts.

QtyPartRefs
1
TMR-0521
U1
1
LTC1257
U2
1
LM6172
U3
1
Arduino_Uno_R3_SMD_Shield
A1
1
I2C Display
J1
1
Trigger Output
J2
1
Analog Output
J3
1
Filter DAC
JP1
1
Negative bias
JP2
1
Gain = 1
JP3
1
Filter Output
JP4
1
20k
RV1
1
3u3
L1
1
10u
C1
1
22u
C2
2
100n
C3, C4
1
100n
C5
2
2u2
C6, C8
3
10n
C7, C9, C11
1
2p2
C10
Show 6 more
QtyPartRefs
1
10k
R1
1
10k
R2
2
100R
R3, R4
1
22R
R5
1
10k
R6
1
47R
R7

FNMES-Technical-Guide design files

The KiCad project lives in the ThemisEfth/fNMES-Technical-Guide repository on GitHub; these links point at the commit this page was built from.

FNMES-Technical-Guide: common questions

What microcontroller does the FNMES-Technical-Guide use?

The FNMES-Technical-Guide is built around the Arduino_Uno_R3_SMD_Shield, from the AVR/Arduino family.

How big is the FNMES-Technical-Guide PCB?

The FNMES-Technical-Guide measures 58.5 × 44.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FNMES-Technical-Guide?

31 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the FNMES-Technical-Guide design files?

From the ThemisEfth/fNMES-Technical-Guide repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the FNMES-Technical-Guide design in my own project?

Yes, under the terms of its MIT license, which ThemisEfth chose for the repository.

Can I test firmware for the FNMES-Technical-Guide without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards