CoolEX
TherealONE12·CoolEX·hardware/pwm_Colex.kicad_pcb
About the CoolEX PCB
CoolEX is an open source PCB design by TherealONE12, published on GitHub. It is a 2-layer board measuring 23.5 × 41.5 mm, with 22 components from 17 distinct parts.
Other key parts include the NE555DR and CH224K. By type, the board carries 6 connectors, 5 capacitors, 5 resistors, 3 diodes, 2 ICs and 1 transistor.
It belongs with the power & battery designs in this gallery.
From the project
A cooler for any PC (As long as the dimensions are ok
A laptop cooling stand with up to 5 fans and custom PWM control. Built because my laptop kept overheating and commercial cooling pads are overpriced.
This is a 3D printed stand with five 80mm fans that sit directly under your laptop. The fans are controlled by a custom PCB that generates PWM signals from a simple analog circuit. Power comes from any USB-C PD charger that can do 12V.
Main components on the CoolEX
CoolEX bill of materials (BOM)
22 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555DR TI(德州仪器) | SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U1 |
| 1 | CH224K WCH(南京沁恒) | ESSOP-10_L4.9-W3.9-P1.0-LS6.0-TL-EP | U2 |
| 1 | AO3400A | SOT-23 | Q1 |
| 1 | USB_C_Receptacle | USB-C_16 | J1 |
| 5 | 1-0301FBV0T Conn_01x03 TAD | 1x03_P2.54mm | J2, J3, J4, J5, J6 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 1 | 1N5819 | D_DO-41_SOD81_P7.62mm_Horizontal | D3 |
| 1 | 1uF | C_0603 | C1 |
| 1 | 100nF | C_0603 | C2 |
| 1 | 10nF | C_0603 | C3 |
| 1 | 1nF | C_0603 | C4 |
| 1 | 10uF | C_0805 | C5 |
| 1 | 24k | R_0603_1608Metric | R1 |
| 1 | 50k | Bourns-PDB18 | R2 |
| 1 | 1k | R_0603_1608Metric | R3 |
| 1 | 10k | R_0603_1608Metric | R4 |
| 1 | 100 | R_0603_1608Metric | R5 |
CoolEX design files
The KiCad project lives in the TherealONE12/CoolEX repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/pwm_Colex.kicad_pcb
- Schematichardware/pwm_Colex.kicad_sch
- BOMhardware/BOM.csv
CoolEX: common questions
How big is the CoolEX PCB?
The CoolEX measures 23.5 × 41.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CoolEX?
22 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CoolEX design files?
From the TherealONE12/CoolEX repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CoolEX design in my own project?
The repository has no license, so all rights stay with TherealONE12. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k