Aeroportal

TheScientist101·aeroportal·pcb/aeroportal.kicad_pcb

Aeroportal PCB layout, top view — open source ESP8266 board by TheScientist101

About the Aeroportal PCB

Aeroportal is an open source ESP8266 PCB design by TheScientist101, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 4 components from 4 distinct parts.

Its main chip is the WEMOS_C3_Mini, from the ESP8266 family. Other key parts include the TFT_ST7735_SD. By type, the board carries 2 ICs, 1 connector and 1 resistor.

It belongs with the audio, iot & wireless and displays & leds designs in this gallery.

From the project

A weather focused alarm clock.

Aeroportal is a weather-centered home hub that is designed with simplicity at its core.

The dashboard is hosted at: https://aeroportal.urjith.dev/

- Weather information - Time and date - Alarms - Broadcast audio messages

The PCB is designed in KiCad which is in the pcb folder. The electronics consist of a Wemos C3 mini, a TFT display, an I2S amplifier, and a speaker. The PCB is designed to be powered by a USB-C cable connected a wall outlet.

Aeroportal, from the project README
From the project README

Main components on the Aeroportal

Aeroportal bill of materials (BOM)

4 components, 4 distinct parts.

QtyPartRefs
1
WEMOS_C3_Mini
U1
1
TFT_ST7735_SD
U2
1
MAX98357A Breakout Board
J1
1
10 OHM
R1

Aeroportal design files

The KiCad project lives in the TheScientist101/aeroportal repository on GitHub; these links point at the commit this page was built from.

Aeroportal: common questions

What microcontroller does the Aeroportal use?

The Aeroportal is built around the WEMOS_C3_Mini, from the ESP8266 family.

How big is the Aeroportal PCB?

The Aeroportal measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Aeroportal?

4 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Aeroportal design files?

From the TheScientist101/aeroportal repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Aeroportal design in my own project?

The repository has no license, so all rights stay with TheScientist101. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Aeroportal without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

Similar boards