Ultrasonic-Whack-A-Mole

TheWasian·Ultrasonic-Whack-A-Mole·ENGG3000-BaseStation/ENGG3000-BaseStation.kicad_pcb

Ultrasonic-Whack-A-Mole PCB layout, top view — open source ESP32 board by TheWasian

About the Ultrasonic-Whack-A-Mole PCB

Ultrasonic-Whack-A-Mole is an open source ESP32 PCB design by TheWasian, published on GitHub under the MIT license. It is a 4-layer board measuring 76 × 40 mm, with 48 components from 29 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the TPS63001DRCR and CN3085. By type, the board carries 25 resistors, 9 capacitors, 2 ICs, 2 transistors, 2 connectors and 2 LEDs.

It belongs with the iot & wireless, displays & leds and sensors designs in this gallery.

From the project

Turn movement into gameplay with ultrasonic tracking and a 3D browser game.

Turn movement into gameplay with ultrasonic tracking and a 3D browser game.

Three ESP32 boards. Six targets. One interactive engineering project.

Overview · Gallery · Getting started · Hardware · Development · Documentation

Wacker5 brings a physical control system to the classic Whack-A-Mole game. Three ESP32-S3 boards use ultrasonic sensors to estimate a player's position, then send tracking data to a browser game where movement controls the hammer across six mole targets. You can also play with a mouse without connecting the hardware.

Ultrasonic-Whack-A-Mole, from the project README
From the project README

Main components on the Ultrasonic-Whack-A-Mole

Ultrasonic-Whack-A-Mole bill of materials (BOM)

48 components, 29 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS63001DRCR
U2
1
CN3085
CONSONANCE(上海如韵)
U3
1
SS8050
Q1
1
AO3401A
Q2
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J5
1
Power Switch
J7
1
NiMH 2S Pack
2S BAT
1
Buzzer
BZ1
1
ESP32-S3-WROOM-1-N16R8
ESP32-S3-WROOM-1-N16R8
1
UART0
UART1
1
3.3V
3.3V
1
5V
5V
1
SS14
D5
1
2.2UH
2.2uH
L1
3
1UF
1uF
C1, C4, C7
2
10UF
10uF
C2, C3
3
10UF
10uF
C5, C8, C9
1
100NF
100nF
C6
7
5.1K
5.1k
R1, R2, R3, R4, R10, R11, R17
2
22
R5, R6
Show 9 more
QtyPartRefs
4
10K
10k
R7, R8, R9, R18
3
1k
R12, R19, R21
1
100R
R13
1
51K
51k
R14
1
200K
200k
R15
1
330R
R16
2
10K
10k
R20, R23
1
1.5K
1.5k
R22
2
220R
R24, R25

Ultrasonic-Whack-A-Mole design files

The KiCad project lives in the TheWasian/Ultrasonic-Whack-A-Mole repository on GitHub; these links point at the commit this page was built from.

Ultrasonic-Whack-A-Mole: common questions

What microcontroller does the Ultrasonic-Whack-A-Mole use?

The Ultrasonic-Whack-A-Mole is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.

How big is the Ultrasonic-Whack-A-Mole PCB?

The Ultrasonic-Whack-A-Mole measures 76 × 40 mm, has 4 copper layers and is 1.600198 mm thick.

How many components are on the Ultrasonic-Whack-A-Mole?

48 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ultrasonic-Whack-A-Mole design files?

From the TheWasian/Ultrasonic-Whack-A-Mole repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ultrasonic-Whack-A-Mole design in my own project?

Yes, under the terms of its MIT license, which TheWasian chose for the repository.

Can I test firmware for the Ultrasonic-Whack-A-Mole without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards