Hcp cross

thiesgerken·hoermann-hcp2-adapter·pcb/hcp-cross.kicad_pcb

Hcp cross PCB layout, top view — open source ESP32 board by thiesgerken

About the Hcp cross PCB

Hcp cross is an open source ESP32 PCB design by thiesgerken, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 44.5 mm, with 5 components from 5 distinct parts.

Its main chip is the ESP32-C3 Super Mini, from the ESP32 family. Other key parts include the Isolated RS485. By type, the board carries 2 ICs, 1 connector and 1 jumper.

It belongs with the iot & wireless designs in this gallery.

From the project

PCB + Enclosure for Hörmann HCP2 ESP32 Adapter

An open carrier PCB and 3D-printable enclosure for connecting an ESP32-C3 to a Hörmann Series 4 garage door opener.

This is the documentation repository for how I built my adapter around the ESPHome Hörmann HCP component. It may be useful for other people building one as well.

- 🧩 a fully routed two-layer KiCad carrier PCB with project-specific footprints - ⚙️ reproducible Python generators for the schematic, PCB, manufacturing outputs, and renders - 📦 a compact, parametric build123d enclosure matched directly to the PCB geometry - 🔌 a ready-to-flash ESPHome configuration with Wi-Fi…

Hcp cross, from the project README
From the project README

Main components on the Hcp cross

ESP32-C3 Super MiniIsolated RS485

Hcp cross bill of materials (BOM)

5 components, 5 distinct parts.

QtyPartRefs
1
ESP32-C3 Super Mini
U1
1
Isolated RS485
U2
1
HCP2 6P6C
J1
1
BUS_PWR
JP1
1
LM2596 HW-411
PS1

Hcp cross design files

The KiCad project lives in the thiesgerken/hoermann-hcp2-adapter repository on GitHub; these links point at the commit this page was built from.

Hcp cross: common questions

What microcontroller does the Hcp cross use?

The Hcp cross is built around the ESP32-C3 Super Mini, from the ESP32 family.

How big is the Hcp cross PCB?

The Hcp cross measures 65 × 44.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hcp cross?

5 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Hcp cross design files?

From the thiesgerken/hoermann-hcp2-adapter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Hcp cross design in my own project?

Yes, under the terms of its MIT license, which thiesgerken chose for the repository.

Can I test firmware for the Hcp cross without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in hoermann-hcp2-adapter

Similar boards