Hcp straight
thiesgerken·hoermann-hcp2-adapter·pcb/hcp-straight.kicad_pcb
About the Hcp straight PCB
Hcp straight is an open source ESP32 PCB design by thiesgerken, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 44.5 mm, with 5 components from 5 distinct parts.
Its main chip is the ESP32-C3 Super Mini, from the ESP32 family. Other key parts include the Isolated RS485. By type, the board carries 2 ICs, 1 connector and 1 jumper.
It belongs with the iot & wireless designs in this gallery.
From the project
PCB + Enclosure for Hörmann HCP2 ESP32 Adapter
An open carrier PCB and 3D-printable enclosure for connecting an ESP32-C3 to a Hörmann Series 4 garage door opener.
This is the documentation repository for how I built my adapter around the ESPHome Hörmann HCP component. It may be useful for other people building one as well.
- 🧩 a fully routed two-layer KiCad carrier PCB with project-specific footprints - ⚙️ reproducible Python generators for the schematic, PCB, manufacturing outputs, and renders - 📦 a compact, parametric build123d enclosure matched directly to the PCB geometry - 🔌 a ready-to-flash ESPHome configuration with Wi-Fi…

Main components on the Hcp straight
Hcp straight bill of materials (BOM)
5 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3 Super Mini | ESP32-C3_SuperMini | U1 |
| 1 | Isolated RS485 | RS485_Isolated_34x18 | U2 |
| 1 | HCP2 6P6C | RJ12_Amphenol_54601-x06_Horizontal | J1 |
| 1 | BUS_PWR | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | LM2596 HW-411 | LM2596_HW-411 | PS1 |
Hcp straight design files
The KiCad project lives in the thiesgerken/hoermann-hcp2-adapter repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/hcp-straight.kicad_pcb
- Schematicpcb/hcp-straight.kicad_sch
Hcp straight: common questions
What microcontroller does the Hcp straight use?
The Hcp straight is built around the ESP32-C3 Super Mini, from the ESP32 family.
How big is the Hcp straight PCB?
The Hcp straight measures 65 × 44.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hcp straight?
5 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hcp straight design files?
From the thiesgerken/hoermann-hcp2-adapter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Hcp straight design in my own project?
Yes, under the terms of its MIT license, which thiesgerken chose for the repository.
Can I test firmware for the Hcp straight without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in hoermann-hcp2-adapter
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k