9 open source boards using the ESP32_C3_Super_Mini
Real designs built with the ESP32_C3_Super_Mini, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Super Mini Mega Tester
GadgetReboot
100 × 99.7 mm44 parts2LGPL-3.04ESP32
Wifi-Death-V1
izaanhussain
66 × 50.3 mm6 parts2LNo license1ESP32
Cric-Pro-Hardware
gaurav3611
48.3 × 60 mm10 parts2LNo license0ESP32
Hcp cross
thiesgerken
65 × 44.5 mm5 parts2LMIT0ESP32
ESP32C3 Slave PROFET
RoboDurden
80 × 33 mm29 parts2LMIT2ESP32
Hcp straight
thiesgerken
65 × 44.5 mm5 parts2LMIT0ESP32
ESP32C3 Slave N-CH
RoboDurden
80 × 33 mm23 parts2LMIT2ESP32
FilaBoss control PCB b
ronisillman
88.9 × 50.8 mm24 parts2LApache-2.00ESP32
ESP32 C3 Slave
RoboDurden
91.1 × 33.2 mm22 parts2LMIT2
How designs wire the ESP32_C3_Super_Mini
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ESP32_C3_Super_Mini connects to, and the resistors, capacitors and other passives placed on it.
- Pin 15 is left unconnected on 2 of 2 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 12, -2, GND | Connected to: GND 67% · not connected 33% | — |
| Pin 15 | Connected to: Not connected 100% | — |
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Super Mini Mega Tester by GadgetReboot, ESP32 C3 Slave by RoboDurden, Wifi-Death-V1 by izaanhussain and Cric-Pro-Hardware by gaurav3611.
The ESP32_C3_Super_Mini in open source designs
The gallery holds 9 open source boards using the ESP32_C3_Super_Mini from 6 GitHub repositories; a typical one measures about 80 × 44.5 mm and carries around 22 components.
100% are two-layer designs, the rest use four layers or more, and 78% carry an open source license.
The most starred is Super Mini Mega Tester by GadgetReboot.
Microcontrollers on boards using the ESP32_C3_Super_Mini
What boards using the ESP32_C3_Super_Mini are built for
ESP32_C3_Super_Mini: common questions
Where can I find a ESP32_C3_Super_Mini reference design?
Each of the 9 boards on this page is a real design using the ESP32_C3_Super_Mini. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32_C3_Super_Mini pin 15 connected?
Pin 15 is left unconnected on 2 of 2 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32_C3_Super_Mini.
Which microcontrollers do boards using the ESP32_C3_Super_Mini use?
Most are built on ESP32 (9).
How big is a typical board using the ESP32_C3_Super_Mini?
The median is 80 × 44.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the ESP32_C3_Super_Mini?
By GitHub stars, Super Mini Mega Tester by GadgetReboot, with 4 stars.
Can I simulate one of these boards using the ESP32_C3_Super_Mini before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.