Laas single stepper
thomasfla·ARDUINO_PICO_TMC2130·hardware/laas_single_stepper/laas_single_stepper.kicad_pcb
About the Laas single stepper PCB
Laas single stepper is an open source RP2040/RP2350 PCB design by thomasfla, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 52 × 23 mm, with 14 components from 6 distinct parts.
Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the SilentStepStick-TMC2130. By type, the board carries 9 diodes, 2 connectors, 1 IC, 1 module and 1 capacitor.
It belongs with the robotics & motion designs in this gallery.
From the project
Control 3 TMC2130 stepper driver via USB comands (TMX2130 + RP2350 / RP2040)
This is configured to control stepper motors of a bambulab A1 mini.
3x SilentStepStick - TMC2130 Stepper Motor Driver 1x Raspberry pi Pico2 dev board
The board will be seen as a virtual COM port.
Send target position, max velocity and max acceleration for all axis (in step, step/s, step/s2)
X 2000 1000 2000\n Y 500 1000 2000\n etc..
The driver will send at a chosen period the motor position and velocity: X 9030 0 Y 4340 0 Z 0 0
Main components on the Laas single stepper
Laas single stepper bill of materials (BOM)
14 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Pico | RPi_Pico_SMD_TH | U1 |
| 1 | SilentStepStick-TMC2130 | Pololu_Breakout-16_15.2x20.3mm | A1 |
| 1 | Conn_01x02_Pin | AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J1 |
| 1 | Conn_01x04_Socket | JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J4 |
| 9 | MSS1P4-M3 | D_MicroSMP_AK | D1, D2, D3, D4, D5, D6, D7, D8 +1 |
| 1 | C | C_1210_3225Metric | C1 |
Laas single stepper design files
The KiCad project lives in the thomasfla/ARDUINO_PICO_TMC2130 repository on GitHub; these links point at the commit this page was built from.
Laas single stepper: common questions
What microcontroller does the Laas single stepper use?
The Laas single stepper is built around the Pico, from the RP2040/RP2350 family.
How big is the Laas single stepper PCB?
The Laas single stepper measures 52 × 23 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Laas single stepper?
14 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Laas single stepper design files?
From the thomasfla/ARDUINO_PICO_TMC2130 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Laas single stepper design in my own project?
Yes, under the terms of its BSD-3-Clause license, which thomasfla chose for the repository.
Can I test firmware for the Laas single stepper without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in ARDUINO_PICO_TMC2130
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k