Laas single stepper withdcdc
thomasfla·ARDUINO_PICO_TMC2130·hardware/laas_single_stepper_withdcdc/laas_single_stepper_withdcdc/laas_single_stepper_withdcdc.kicad_pcb
About the Laas single stepper withdcdc PCB
Laas single stepper withdcdc is an open source RP2040/RP2350 PCB design by thomasfla, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 52 × 30 mm, with 20 components from 10 distinct parts.
Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the TSR1-2433E and SilentStepStick-TMC2130. By type, the board carries 9 diodes, 5 connectors, 2 ICs, 2 capacitors, 1 module and 1 transistor.
It belongs with the robotics & motion designs in this gallery.
From the project
Control 3 TMC2130 stepper driver via USB comands (TMX2130 + RP2350 / RP2040)
This is configured to control stepper motors of a bambulab A1 mini.
3x SilentStepStick - TMC2130 Stepper Motor Driver 1x Raspberry pi Pico2 dev board
The board will be seen as a virtual COM port.
Send target position, max velocity and max acceleration for all axis (in step, step/s, step/s2)
X 2000 1000 2000\n Y 500 1000 2000\n etc..
The driver will send at a chosen period the motor position and velocity: X 9030 0 Y 4340 0 Z 0 0
Main components on the Laas single stepper withdcdc
Laas single stepper withdcdc bill of materials (BOM)
20 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Pico | RPi_Pico_SMD_TH | U1 |
| 1 | TSR1-2433E | Converter_DCDC_TRACO_TSR1-xxxxE_THT | U2 |
| 1 | SilentStepStick-TMC2130 | Pololu_Breakout-16_15.2x20.3mm | A1 |
| 1 | DMG2301L | SOT-23 | Q1 |
| 1 | Conn_01x02_Pin | AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J1 |
| 3 | Conn_01x04 | NS-Tech_Grove_1x04_P2mm_Vertical | J2, J3, J5 |
| 1 | Conn_01x04_Socket | JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J4 |
| 9 | MSS1P4-M3 | D_MicroSMP_AK | D1, D2, D3, D4, D5, D6, D7, D8 +1 |
| 1 | C | C_1210_3225Metric | C1 |
| 1 | 22u 50V | C_1210_3225Metric | C2 |
Laas single stepper withdcdc design files
The KiCad project lives in the thomasfla/ARDUINO_PICO_TMC2130 repository on GitHub; these links point at the commit this page was built from.
Laas single stepper withdcdc: common questions
What microcontroller does the Laas single stepper withdcdc use?
The Laas single stepper withdcdc is built around the Pico, from the RP2040/RP2350 family.
How big is the Laas single stepper withdcdc PCB?
The Laas single stepper withdcdc measures 52 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Laas single stepper withdcdc?
20 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Laas single stepper withdcdc design files?
From the thomasfla/ARDUINO_PICO_TMC2130 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Laas single stepper withdcdc design in my own project?
Yes, under the terms of its BSD-3-Clause license, which thomasfla chose for the repository.
Can I test firmware for the Laas single stepper withdcdc without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in ARDUINO_PICO_TMC2130
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k