ESP32 Shield Zero
ThomasLindenberger37·ESP32_Shield_Zero
About the ESP32 Shield Zero
ESP32 Shield Zero is an open source ESP32 PCB design by ThomasLindenberger37, published on GitHub under the MIT license. It is a 4-layer board measuring 69 × 40.6 mm, with 42 components from 19 distinct parts.
Its main chip is the ESP32_S3_zeroBoard, from the ESP32 family. Other key parts include the TLP175A. By type, the board carries 17 connectors, 15 resistors, 4 ICs, 3 capacitors, 2 diodes and 1 transistor.
It belongs with the sensors, dev boards & breakouts and iot & wireless designs in this gallery.
From the project
This project is a compact ESPhome compatible multisensor shield. The PCB is designed so that all required components can be hand-soldered—no SMD reflow oven or pick-and-place machine is required. We want to eather use SMD componets that can be solderd by hand with a soldering iro
This project is a compact ESPhome compatible multisensor shield. The PCB is designed so that all required components can be hand-soldered—no SMD reflow oven or pick-and-place machine is required. We want to eather use SMD componets that can be solderd by hand with a soldering iron or we want to use modules where the SMD sensors are presolderd. This makes it cheap but easy customizable.

Main components on the ESP32 Shield Zero
ESP32 Shield Zero bill of materials (BOM)
42 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | ESP32_S3_zeroBoard | U1 |
| 1 | ~ | Unbenannt | U2 |
| 1 | ~ | PIR_SR602 | U4 |
| 1 | TLP175A | Toshiba_SOIC-4-6_4.4x3.6mm_P1.27mm | U5 |
| 1 | PT19-21C | LED_0603_1608Metric | Q1 |
| 2 | BME280, SHT40 Module | 1x04_P2.54mm | J1, J14 |
| 3 | SCD40 Module | 1x04_P2.54mm | J2, J10, J13 |
| 3 | Conn_01x02 | 1x02_P2.54mm | J3, J5, J6 |
| 1 | Qwiic_Vertical | JST_1x04_P1.0mm_Vertical_SMD | J4 |
| 4 | Conn_01x03 | 1x03_P2.54mm | J7, J8, J11, J12 |
| 1 | VL53L0X Module | 1x04_P2.54mm | J9 |
| 3 | mmWave Connector | JST_1x04_P1.0mm_Vertical_SMD | J15, J16, J17 |
| 2 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2 |
| 1 | 100n | C_0805_2012Metric | C1 |
| 2 | 10u | C_0805_2012Metric | C2, C3 |
| 2 | 4k7 | R_0805_2012Metric | R1, R2 |
| 6 | 2k2 | R_0805_2012Metric | R3, R4, R9, R13, R14, R15 |
| 1 | 10k | R_0805_2012Metric | R5 |
| 6 | 470R | R_0805_2012Metric | R6, R7, R8, R10, R11, R12 |
ESP32 Shield Zero design files
The KiCad project lives in the ThomasLindenberger37/ESP32_Shield_Zero repository on GitHub; these links point at the commit this page was built from.
- LayoutESP32_Shield.kicad_pcb
- SchematicESP32_Shield.kicad_sch
ESP32 Shield Zero: common questions
What microcontroller does the ESP32 Shield Zero use?
The ESP32 Shield Zero is built around the ESP32_S3_zeroBoard, from the ESP32 family.
How big is the ESP32 Shield Zero?
The ESP32 Shield Zero measures 69 × 40.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ESP32 Shield Zero?
42 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32 Shield Zero design files?
From the ThomasLindenberger37/ESP32_Shield_Zero repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP32 Shield Zero design in my own project?
Yes, under the terms of its MIT license, which ThomasLindenberger37 chose for the repository.
Can I test firmware for the ESP32 Shield Zero without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k