Control Board V1

Thornbots·Supa-Cap·Design Files/Controller Board V1/Control Board V1.kicad_pcb

Control Board V1 layout, top view — open source Raspberry Pi board by Thornbots

About the Control Board V1

Control Board V1 is an open source Raspberry Pi PCB design by Thornbots, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 75 × 125 mm, with 70 components from 27 distinct parts.

Its main chip is the SC0917, from the Raspberry Pi family. Other key parts include the LMR51420XDDCR, INA219BIDR and TCA39306DCUR. By type, the board carries 24 resistors, 13 capacitors, 11 connectors, 8 diodes, 6 ICs and 1 transistor.

From the project

Rose-Hulman's Thornbot's Electrical Team's Super Capacitor Bank

Rose-Hulman's Thornbot's Electrical Team's Super Capacitor Bank

This is an active, work in progress super capacitor bank and super capacitor controller board design that is intended to be used with the DJI Robomaster's competetion.

User Guide (Currently non-existent, but will be completed eventually) can be found in Documentation PCB Files can be found in the Design Files folder, with all of the projects being done in KiCAD 8.0.

Main components on the Control Board V1

Control Board V1 bill of materials (BOM)

70 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LMR51420XDDCR
U1
3
INA219BIDR
U2, U3, U4
1
SC0917
U5
1
TCA39306DCUR
U6
1
LMG5200
Q1
1
XT30PW-F
J1
6
XT30UPB-M
J2, J3, J4, J5, J6, J7
4
SM04B-GHS-TB_LF__SN_-
J8, J9, J10, J11
1
100 nF
Cboot1
1
2.2 uF
Cin1
1
100 nF
Cinx1
1
47 uF
Cout1
1
22.1 kOhm
Rfbb1
1
162 kOhm
Rfbt1
8
LED
D1, D2, D3, D4, D5, D6, D7, D8
1
10 uH
L1
3
10U
10u
C1, C11, C12
2
0.1U
0.1u
C2, C3
3
100 nF
C4, C5, C6
5
47U
47u
C7, C8, C9, C10, C13
Show 7 more
QtyPartRefs
7
R
R1, R15, R18, R19, R20, R21, R22
3
0.01Ω
R2, R5, R9
8
10KΩ
R3, R4, R6, R7, R8, R10, R11, R12
2
2k
R13, R14
1
200K
200k
R16
1
110
R23
2
10K
10k
R25, R26

Control Board V1 design files

The KiCad project lives in the Thornbots/Supa-Cap repository on GitHub; these links point at the commit this page was built from.

Control Board V1: common questions

What microcontroller does the Control Board V1 use?

The Control Board V1 is built around the SC0917, from the Raspberry Pi family.

How big is the Control Board V1?

The Control Board V1 measures 75 × 125 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Control Board V1?

70 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Control Board V1 design files?

From the Thornbots/Supa-Cap repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Control Board V1 design in my own project?

Yes, under the terms of its GPL-3.0 license, which Thornbots chose for the repository.

Can I test firmware for the Control Board V1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in Supa-Cap

Similar boards