7 open source boards using the LMR51420XDDCR

Real designs built with the LMR51420XDDCR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the LMR51420XDDCR

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LMR51420XDDCR connects to, and the resistors, capacitors and other passives placed on it.

  • The SW pin has a inductor on 6 of 6 designs, most often 10 µH (then 3.3 µH).
  • The SW pin has a series capacitor on 6 of 6 designs, most often 100 nF.
  • The CB pin has a series capacitor on 6 of 6 designs, most often 100 nF.
  • The VIN pin has a capacitor to GND on 5 of 6 designs, most often 4.7 µF (then 100 nF).
GNDpin 1Connected to: GND 83% · a signal 17%
SWpin 2Connected to: Signal 100%
  • Inductor on 100% · 10 µH (2), 3.3 µH (1)
  • Series capacitor on 100% · 100 nF (3)
VINpin 3Connected to: VIN 50% · a signal 50%
  • Capacitor to GND on 83% · 4.7 µF (2), 100 nF (1), 1 µF (1)
FBpin 4Connected to: Signal 100%
  • Resistor to GND on 83% · 22.1 kΩ (2), 13.7 kΩ (1)
  • Pull-up to 5V on 83% · 174 kΩ (1), 100 kΩ (1)
  • Series resistor on 33% · 100 kΩ (1)
ENpin 5Connected to: VIN 50% · a signal 50%
  • Capacitor to GND on 67% · 2.2 µF (1)
CBpin 6Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (3)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SHIO88W by csabaala, SHIOGW by csabaala, Dreimaskin-ELS by jonasnic and Poetato by jonasblixt.

The LMR51420XDDCR in open source designs

The gallery holds 7 open source boards using the LMR51420XDDCR from 6 GitHub repositories; a typical one measures about 98.5 × 86.1 mm and carries around 94 components.

57% are two-layer designs, the rest use four layers or more, and 71% carry an open source license.

The most starred is SHIO88W by csabaala.

Microcontrollers on boards using the LMR51420XDDCR

What boards using the LMR51420XDDCR are built for

LMR51420XDDCR: common questions

Where can I find a LMR51420XDDCR reference design?

Each of the 7 boards on this page is a real design using the LMR51420XDDCR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LMR51420XDDCR SW pin connected?

The SW pin has a inductor on 6 of 6 designs, most often 10 µH (then 3.3 µH). Counted from the KiCad layouts of 6 open source designs using the LMR51420XDDCR.

How is the LMR51420XDDCR CB pin connected?

The CB pin has a series capacitor on 6 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the LMR51420XDDCR.

How is the LMR51420XDDCR VIN pin connected?

The VIN pin has a capacitor to GND on 5 of 6 designs, most often 4.7 µF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the LMR51420XDDCR.

Which microcontrollers do boards using the LMR51420XDDCR use?

Most are built on ESP32 (4) and Raspberry Pi (1).

How big is a typical board using the LMR51420XDDCR?

The median is 98.5 × 86.1 mm, and 57% are two-layer designs.

What is the most popular open source board using the LMR51420XDDCR?

By GitHub stars, SHIO88W by csabaala, with 1 stars.

Can I simulate one of these boards using the LMR51420XDDCR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part