TFASPDIMU01
ThunderFly-aerospace·TFASPDIMU01·hw/sch_pcb/TFASPDIMU01.kicad_pcb
About the TFASPDIMU01 PCB
TFASPDIMU01 is an open source PCB design by ThunderFly-aerospace, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 36 × 14 mm, with 26 components from 13 distinct parts.
Other key parts include the SDP3X, ICM-20948, MIC5504-3.3YM5, MIC5504-1.8YM5 and TXS0108EPW. By type, the board carries 11 capacitors, 8 resistors, 5 ICs, 1 connector and 1 diode.
It belongs with the sensors designs in this gallery.
From the project
SPI or I²C differential pressure sensor and IMU unit.
ThunderFly TFASPDIMU01 is SPI/I2C sensor board equipped with a differential pressure sensor (Senserion SDP3x) and 9-axis motion tracking sensor (ICM-20948). Board is equipped with 7pin JST-GH connector. The sensor board is designed for multiple uses. It can be used as a self-adjusting anemometer WINDGAUGE03 or as an airspeed sensor for UAVs with optional function as the external magnetometer.

Main components on the TFASPDIMU01
TFASPDIMU01 bill of materials (BOM)
26 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SDP3X SDP3x | SDP3x | U1 |
| 1 | ICM-20948 | InvenSense_QFN-24_3x3mm_P0.4mm | U2 |
| 1 | MIC5504-3.3YM5 MIC5504-3.3YM5-TR | SOT-23-5 | U4 |
| 1 | MIC5504-1.8YM5 MIC5504-1.8YM5-TR | SOT-23-5 | U5 |
| 1 | TXS0108EPW | TSSOP-20_4.4x6.5mm_P0.65mm | U6 |
| 1 | SM07B-GHS-TB | JST_GH_SM07B-GHS-TB_1x07-1MP_P1.25mm_Horizontal | J1 |
| 1 | BZV55C-5,6V | D_MiniMELF | D1 |
| 6 | 100NF 100nF | SMD-0603 | C1, C2, C3, C4, C9, C10 |
| 4 | 1UF 1uF | SMD-0603 | C5, C6, C7, C8 |
| 1 | 10UF 10uF | SMD-0805 | C11 |
| 1 | - | SMD-0603 | R1 |
| 1 | 0R | SMD-0603 | R2 |
| 6 | 10K 10k | SMD-0603 | R4, R5, R6, R7, R8, R9 |
TFASPDIMU01 design files
The KiCad project lives in the ThunderFly-aerospace/TFASPDIMU01 repository on GitHub; these links point at the commit this page was built from.
TFASPDIMU01: common questions
How big is the TFASPDIMU01 PCB?
The TFASPDIMU01 measures 36 × 14 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TFASPDIMU01?
26 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TFASPDIMU01 design files?
From the ThunderFly-aerospace/TFASPDIMU01 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TFASPDIMU01 design in my own project?
Yes, under the terms of its GPL-3.0 license, which ThunderFly-aerospace chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956