TFI2CADC01
ThunderFly-aerospace·TFI2CADC01·hw/sch_pcb/TFI2CADC01.kicad_pcb
About the TFI2CADC01 PCB
TFI2CADC01 is an open source PCB design by ThunderFly-aerospace, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 25 × 15 mm, with 16 components from 13 distinct parts.
Other key parts include the MIC5504-3.3YM5 and ADS1115IDGS. By type, the board carries 4 capacitors, 4 resistors, 3 connectors, 3 diodes and 2 ICs.
It belongs with the sensors designs in this gallery.
From the project
I2C Analog to digital converter for PixHawk
Compact 4‑channel analog‑to‑digital converter module for Pixhawk‑class autopilots and ThunderFly form‑factor carrier boards. Based on TI ADS1115 (16‑bit Σ‑Δ ADC). Dual Pixhawk JST‑GH I²C ports support in‑line daisy‑chaining.
4 × single‑ended inputs (AIN0…AIN3) up to VDD range (0–3.3 V) 16‑bit ADC (ADS1115IDGS) with programmable gain amplifier (PGA) I²C interface, 100/400 kHz compliant; on‑board 4.7 kΩ pull‑ups to 3.3 V ADDR solder-bridge for selectable I²C address (default 0x48) ALERT/RDY interrupt output (optional test‑point) Bus‑powered from +5 V; on‑board LDO to internal 3.3 V Input/rail…

Main components on the TFI2CADC01
TFI2CADC01 bill of materials (BOM)
16 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MIC5504-3.3YM5 | SOT-23-5 | U1 |
| 1 | ADS1115IDGS | VSSOP-10_3x3mm_P0.5mm | U2 |
| 1 | HEADER_2X04 HEADER_2x04 | PinHeader_2x04_P2.54mm_Edge_Mount | J1 |
| 2 | SM04B-GHS-TB | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J2, J3 |
| 1 | PWR | LED_0603_1608Metric | D1 |
| 1 | BZX585-B5V6.115 | D_SOD-523 | D2 |
| 1 | ALERT | LED_0603_1608Metric | D3 |
| 1 | 10UF 10uF | C_0805_2012Metric | C1 |
| 2 | 100NF 100nF | C_0603_1608Metric | C2, C4 |
| 1 | 1UF 1uF | C_0603_1608Metric | C3 |
| 1 | 180R | R_0603_1608Metric | R1 |
| 2 | 10K 10k | R_0603_1608Metric | R2, R3 |
| 1 | 4K7 4k7 | R_0603_1608Metric | R4 |
TFI2CADC01 design files
The KiCad project lives in the ThunderFly-aerospace/TFI2CADC01 repository on GitHub; these links point at the commit this page was built from.
TFI2CADC01: common questions
How big is the TFI2CADC01 PCB?
The TFI2CADC01 measures 25 × 15 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TFI2CADC01?
16 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TFI2CADC01 design files?
From the ThunderFly-aerospace/TFI2CADC01 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TFI2CADC01 design in my own project?
Yes, under the terms of its GPL-3.0 license, which ThunderFly-aerospace chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956