Mirage

tiachachat·Mirage

Mirage PCB layout, top view — open source ESP32 board by tiachachat

About the Mirage PCB

Mirage is an open source ESP32 PCB design by tiachachat, published on GitHub. It is a 2-layer board measuring 80 × 90 mm, with 62 components from 24 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the TLV1117LV-3.3, LM2596S-5 and LTV-817. By type, the board carries 17 resistors, 12 capacitors, 9 LEDs, 6 connectors, 5 ICs and 5 diodes.

It belongs with the iot & wireless designs in this gallery.

From the project

ESP32-C3 Wi-Fi Device Controller

Mirage, from the project README
From the project README

Main components on the Mirage

Mirage bill of materials (BOM)

62 components, 24 distinct parts.

QtyPartRefs
1
TLV1117LV-3.3
U1
1
LM2596S-5
U2
1
ESP32-C3-WROOM-02
U3
2
LTV-817
U4, U5
2
BC817
Q1, Q2
1
Conn_01x04_Pin
J1
2
Screw_Terminal_01x02
J2, J4
3
Screw_Terminal_01x03
J3, J5, J6
1
Polyfuse
F1
2
RT314A05
K1, K2
1
SW_SPST
SW1
6
LED_YELLOW
DL1, DL2, DL3, DL4, DL5, DL6
3
LED_BLUE
DL7, DL8, DL9
1
1N5822
D3
4
1N4148W-G
D6, D8, D9, D11
1
Fuse
FB1
1
33u
L1
1
680u
C1
5
22u
C2, C3, C4, C7, C10
5
100n
C5, C8, C9, C11, C12
Show 4 more
QtyPartRefs
1
220u
C6
9
1k
R1, R2, R3, R4, R5, R8, R9, R16 +1
4
10k
R6, R7, R10, R15
4
4k7
R11, R12, R13, R14

Mirage design files

The KiCad project lives in the tiachachat/Mirage repository on GitHub; these links point at the commit this page was built from.

Mirage: common questions

What microcontroller does the Mirage use?

The Mirage is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the Mirage PCB?

The Mirage measures 80 × 90 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mirage?

62 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the Mirage design files?

From the tiachachat/Mirage repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Mirage design in my own project?

The repository has no license, so all rights stay with tiachachat. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Mirage without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards