Dual ESP Carrier
tiagojanz·winddragons_rover·hardware/dual_esp_carrier/Dual_ESP_Carrier.kicad_pcb
About the Dual ESP Carrier PCB
Dual ESP Carrier is an open source ESP32 PCB design by tiagojanz, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 9 components from 9 distinct parts.
Its main chip is the ESP32_lafvin, from the ESP32 family. By type, the board carries 4 connectors and 4 switches.
It belongs with the rf & radio and iot & wireless designs in this gallery.
From the project
Projeto de automação e telemetria para boias robóticas náuticas autónomas (Rovers) e estação de controlo com ecrã (Base Station), baseado na arquitetura universal Dual ESP32-C6 (Master Lafvin LCD 1.47" + Coprocessador DevKitC-1).
Projeto de automação e telemetria para boias robóticas náuticas autónomas (Rovers) e estação de controlo com ecrã (Base Station), baseado na arquitetura universal Dual ESP32-C6 (Master Lafvin LCD 1.47" + Coprocessador DevKitC-1).
O módulo LoRa Ra-02 (SX1278 a 433MHz) é ligado exclusivamente ao Coprocessador ESP32-C6 (evitando conflito com o barramento SPI partilhado entre o LCD e o MicroSD do Lafvin):
Dual ESP Carrier bill of materials (BOM)
9 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32_lafvin | PinHeader_1x09_P2.54mm_Horizontal | J1 |
| 1 | ESP32_B_LANDSCAPE | PinHeader_1x09_P2.54mm_Horizontal | J2 |
| 1 | SX1278_LORA_2x4 | PinHeader_2x04_P2.54mm_Vertical | J3 |
| 1 | GPS_LC29H_7PIN | PinHeader_1x07_P2.54mm_Horizontal | J6 |
| 1 | PS5_JOYSTICK | Alps_RKJXV1224005 | JOY1 |
| 1 | subir ancora | SKRKAEE020 | SW1 |
| 1 | MODE | SKRKAEE020 | SW2 |
| 1 | largar ancora | SKRKAEE020 | SW3 |
| 1 | BOOT | SKRKAEE020 | SW4 |
Dual ESP Carrier design files
The KiCad project lives in the tiagojanz/winddragons_rover repository on GitHub; these links point at the commit this page was built from.
Dual ESP Carrier: common questions
What microcontroller does the Dual ESP Carrier use?
The Dual ESP Carrier is built around the ESP32_lafvin, from the ESP32 family.
How big is the Dual ESP Carrier PCB?
The Dual ESP Carrier measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dual ESP Carrier?
9 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dual ESP Carrier design files?
From the tiagojanz/winddragons_rover repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Dual ESP Carrier design in my own project?
The repository has no license, so all rights stay with tiagojanz. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Dual ESP Carrier without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in winddragons_rover
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k