Dual ESP Carrier template

tiagojanz·winddragons_rover·hardware/dual_esp_carrier/Dual_ESP_Carrier_template.kicad_pcb

Dual ESP Carrier template PCB layout, top view — open source ESP32 board by tiagojanz

About the Dual ESP Carrier template PCB

Dual ESP Carrier template is an open source ESP32 PCB design by tiagojanz, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 9 components from 9 distinct parts.

Its main chip is the ESP32_lafvin, from the ESP32 family. By type, the board carries 4 connectors and 4 switches.

It belongs with the rf & radio and iot & wireless designs in this gallery.

From the project

Projeto de automação e telemetria para boias robóticas náuticas autónomas (Rovers) e estação de controlo com ecrã (Base Station), baseado na arquitetura universal Dual ESP32-C6 (Master Lafvin LCD 1.47" + Coprocessador DevKitC-1).

Projeto de automação e telemetria para boias robóticas náuticas autónomas (Rovers) e estação de controlo com ecrã (Base Station), baseado na arquitetura universal Dual ESP32-C6 (Master Lafvin LCD 1.47" + Coprocessador DevKitC-1).

O módulo LoRa Ra-02 (SX1278 a 433MHz) é ligado exclusivamente ao Coprocessador ESP32-C6 (evitando conflito com o barramento SPI partilhado entre o LCD e o MicroSD do Lafvin):

Dual ESP Carrier template bill of materials (BOM)

9 components, 9 distinct parts.

QtyPartRefs
1
ESP32_lafvin
J1
1
ESP32_B_LANDSCAPE
J2
1
SX1278_LORA_2x4
J3
1
GPS_LC29H_7PIN
J6
1
PS5_JOYSTICK
JOY1
1
subir ancora
SW1
1
MODE
SW2
1
largar ancora
SW3
1
BOOT
SW4

Dual ESP Carrier template design files

The KiCad project lives in the tiagojanz/winddragons_rover repository on GitHub; these links point at the commit this page was built from.

Dual ESP Carrier template: common questions

What microcontroller does the Dual ESP Carrier template use?

The Dual ESP Carrier template is built around the ESP32_lafvin, from the ESP32 family.

How big is the Dual ESP Carrier template PCB?

The Dual ESP Carrier template measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Dual ESP Carrier template?

9 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Dual ESP Carrier template design files?

From the tiagojanz/winddragons_rover repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Dual ESP Carrier template design in my own project?

The repository has no license, so all rights stay with tiagojanz. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Dual ESP Carrier template without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in winddragons_rover

Similar boards