WindDragons Universal Carrier Board
tiagojanz·winddragons_rover·hardware/universal_pcb/Universal_Carrier.kicad_pcb
About the WindDragons Universal Carrier Board
WindDragons Universal Carrier Board is an open source ESP32 PCB design by tiagojanz, published on GitHub. It is a 2-layer board measuring 100 × 85 mm, with 13 components from 13 distinct parts.
Its main chip is the ESP32_T_LANDSCAPE, from the ESP32 family. By type, the board carries 8 connectors and 4 switches.
It belongs with the rf & radio, iot & wireless and dev boards & breakouts designs in this gallery.
From the project
Projeto de automação e telemetria para boias robóticas náuticas autónomas (Rovers) e estação de controlo com ecrã (Base Station), baseado na arquitetura universal Dual ESP32-C6 (Master Lafvin LCD 1.47" + Coprocessador DevKitC-1).
Projeto de automação e telemetria para boias robóticas náuticas autónomas (Rovers) e estação de controlo com ecrã (Base Station), baseado na arquitetura universal Dual ESP32-C6 (Master Lafvin LCD 1.47" + Coprocessador DevKitC-1).
O módulo LoRa Ra-02 (SX1278 a 433MHz) é ligado exclusivamente ao Coprocessador ESP32-C6 (evitando conflito com o barramento SPI partilhado entre o LCD e o MicroSD do Lafvin):
WindDragons Universal Carrier Board bill of materials (BOM)
13 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32_T_LANDSCAPE | PinHeader_1x09_P2.54mm_Horizontal | J1 |
| 1 | ESP32_B_LANDSCAPE | PinHeader_1x09_P2.54mm_Horizontal | J2 |
| 1 | SX1278_LORA_2x4 | PinHeader_2x04_P2.54mm_Vertical | J3 |
| 1 | BATT_APM | PinHeader_1x03_P2.54mm_Horizontal | J4 |
| 1 | DETECTOR_ANCORA | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | GPS_LC29H_7PIN | PinHeader_1x07_P2.54mm_Horizontal | J6 |
| 1 | PWR_ESP_5V | PinHeader_1x02_P2.54mm_Horizontal | J11 |
| 1 | PWR_SERVO_5V | PinHeader_1x02_P2.54mm_Horizontal | J12 |
| 1 | PS5_JOYSTICK | Alps_RKJXV1224005 | JOY1 |
| 1 | subir ancora | SKRKAEE020 | SW1 |
| 1 | MODE | SKRKAEE020 | SW2 |
| 1 | largar ancora | SKRKAEE020 | SW3 |
| 1 | BOOT | SKRKAEE020 | SW4 |
WindDragons Universal Carrier Board design files
The KiCad project lives in the tiagojanz/winddragons_rover repository on GitHub; these links point at the commit this page was built from.
WindDragons Universal Carrier Board: common questions
What microcontroller does the WindDragons Universal Carrier Board use?
The WindDragons Universal Carrier Board is built around the ESP32_T_LANDSCAPE, from the ESP32 family.
How big is the WindDragons Universal Carrier Board?
The WindDragons Universal Carrier Board measures 100 × 85 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the WindDragons Universal Carrier Board?
13 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the WindDragons Universal Carrier Board design files?
From the tiagojanz/winddragons_rover repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the WindDragons Universal Carrier Board design in my own project?
The repository has no license, so all rights stay with tiagojanz. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the WindDragons Universal Carrier Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in winddragons_rover
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k