23 open source boards using the CD4066BE
Real designs built with the CD4066BE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Tastatura-Cobra
r0b0t1cu
298.5 × 116.8 mm109 parts2LNo license3DMH VCEG PCB 1 Mk1 1
DeMarco
148 × 175 mm241 parts2LCC0-1.01ESP32
Moisture sensor hardware
IMHarris
111 × 58 mm34 parts2LCC-BY-SA-4.01AVR/Arduino
PID Board
AaronDoubert
250 × 100 mm218 parts2LNo license0MPXDecorder-V2
akira345
100 × 84.2 mm119 parts2LNo license0Modular sound synthesizer
zetapersei
163.1 × 114 mm97 parts2LGPL-3.00Effect pedal
Ahreo
104.8 × 97.8 mm85 parts2LNo license0MapEletro
Heymity
250 × 200 mm52 parts2LNo license0TAKEHOMELAB ESP32
IsaacEmmanuelGudinoJacobo
93.5 × 119.2 mm34 parts2LNo license0Barramento V04
Pinheirogustavo
90 × 100 mm44 parts2LNo license2DMH VCEG PCB 1
DeMarco
148 × 175 mm239 parts2LCC0-1.01Planta cd4066
jesuscuadrul2
35.3 × 46.1 mm11 parts2LNo license1AVR/Arduino
Lab 8 Breadboard
MVaugn
167.6 × 114.3 mm67 parts2LNo license0Fonte tensao LM675 v05b
Pinheirogustavo
90 × 100 mm40 parts2LNo license2DMH VCEG PCB 2
DeMarco
148 × 139 mm224 parts2LCC0-1.01AVR/Arduino
PCBatmega324p
TiebeDeclercq
98.4 × 71.8 mm43 parts2LNo license0Condicionamento e aquisicao 2 canais
Pinheirogustavo
90 × 100 mm33 parts2LNo license2ServoDriverBoard
TiebeDeclercq
68.6 × 38.1 mm26 parts2LNo license0Fonte corrente mono V01b compacto
Pinheirogustavo
45 × 30 mm20 parts2LNo license2ServoDriverBoardBeforeAuto
TiebeDeclercq
68.6 × 38.1 mm20 parts2LNo license0Fonte corrente mono V01c compacto
Pinheirogustavo
45 × 30 mm20 parts2LNo license2Aquisicao STM Barramento v01
Pinheirogustavo
90 × 100 mm19 parts2LNo license2HeartLab
Pinheirogustavo
35 × 35 mm16 parts2LNo license2
How designs wire the CD4066BE
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the CD4066BE connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: CD4066BE 31%, a connector 31% |
|
| PC13_LEDpin 2 | Connected to: Signal 85% |
|
| PC14pin 3 | Connected to: Signal 77% · GND 15% |
|
| PC15pin 4 | Connected to: CD4066BE 23%, a connector 23% |
|
| PA0pin 5 | Connected to: A connector 23% |
|
| VSSpin 7 | Connected to: GND 77% · not connected 15% | — |
| PA3_RX2pin 8 | Connected to: A connector 31%, CD4066BE 23% · not connected 15% |
|
| PB0pin 13 | Connected to: A connector 31% |
|
| VDDpin 14 | Connected to: 5V 77% · a signal 15% |
|
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Tastatura-Cobra by r0b0t1cu, Aquisicao STM Barramento v01 by Pinheirogustavo, DMH VCEG PCB 1 by DeMarco and Moisture sensor hardware by IMHarris.
The CD4066BE in open source designs
The gallery holds 23 open source boards using the CD4066BE from 13 GitHub repositories; a typical one measures about 98.4 × 100 mm and carries around 43 components.
100% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.
The most starred is Tastatura-Cobra by r0b0t1cu.
Microcontrollers on boards using the CD4066BE
What boards using the CD4066BE are built for
CD4066BE: common questions
Where can I find a CD4066BE reference design?
Each of the 23 boards on this page is a real design using the CD4066BE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the CD4066BE?
The 4001, 74HC595 and TL072 appear in the most repositories here.
Which microcontrollers do boards using the CD4066BE use?
Most are built on AVR/Arduino (3) and ESP32 (1).
How big is a typical board using the CD4066BE?
The median is 98.4 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the CD4066BE?
By GitHub stars, Tastatura-Cobra by r0b0t1cu, with 3 stars.
Can I simulate one of these boards using the CD4066BE before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.