Beeb wifiport
timhawes·beeb_wifiport
About the Beeb wifiport PCB
Beeb wifiport is an open source ESP32 PCB design by timhawes, published on GitHub. It is a 2-layer board measuring 28 × 28 mm, with 18 components from 13 distinct parts.
Its main chip is the ESP32-S3-MINI-1-N4R2, from the ESP32 family. Other key parts include the LDL212PV33R and NXB0104GU12. By type, the board carries 6 capacitors, 3 ICs, 3 connectors, 3 resistors, 2 switches and 1 diode.
From the project
Serial interface for connecting a BBC Micro user port to an ESP32-S3.
Main components on the Beeb wifiport
Beeb wifiport bill of materials (BOM)
18 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-MINI-1-N4R2 | ESP32-S2-MINI-1 | U1 |
| 1 | LDL212PV33R | DFN-6-1EP_2x2mm_P0.5mm_EP1.02x1.6mm | U3 |
| 1 | NXB0104GU12 | NXP_XQFN12_SOT1174-1 | U4 |
| 1 | 613020243121 | PinSocket_2x10_P2.54mm_Horizontal | J1 |
| 1 | USB4105-GF-A | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | 1040310811 | microSD_HC_Molex_104031-0811 | J3 |
| 2 | EVQ-P7A01P | SW_SPST_EVQP7A | SW1, SW2 |
| 1 | PMEG2020CPA,115 | HUSON-3-1EP_2x2mm_P1.3mm_EP1.1x1.6mm | D1 |
| 2 | 10uF | C_0603_1608Metric | C1, C2 |
| 3 | 0.1uF | C_0402_1005Metric | C3, C5, C6 |
| 1 | 1uF | C_0402_1005Metric | C4 |
| 2 | 5.1K 1% | R_0402_1005Metric | R1, R2 |
| 1 | 746X101103JP | CTS_746X101103JP | RN1 |
Beeb wifiport design files
The KiCad project lives in the timhawes/beeb_wifiport repository on GitHub; these links point at the commit this page was built from.
- Layoutbeeb_wifiport.kicad_pcb
- Schematicbeeb_wifiport.kicad_sch
Beeb wifiport: common questions
What microcontroller does the Beeb wifiport use?
The Beeb wifiport is built around the ESP32-S3-MINI-1-N4R2, from the ESP32 family.
How big is the Beeb wifiport PCB?
The Beeb wifiport measures 28 × 28 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Beeb wifiport?
18 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Beeb wifiport design files?
From the timhawes/beeb_wifiport repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Beeb wifiport design in my own project?
The repository has no license, so all rights stay with timhawes. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Beeb wifiport without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k