16 open source boards using the ESP32-S3-MINI-1-N4R2

Real designs built with the ESP32-S3-MINI-1-N4R2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the ESP32-S3-MINI-1-N4R2

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the ESP32-S3-MINI-1-N4R2 connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin has a capacitor to GND on 10 of 10 designs, most often 1 µF (then 100 nF).
  • The EN pin has a pull-up to 3.3V on 9 of 10 designs, most often 10 kΩ.
  • The 3V3 pin is tied to 3.3V on 9 of 11 designs (a signal on 2).
  • The IO26 pin is left unconnected on 9 of 10 designs.
GNDpin 1, 2, 42, 43, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65Connected to: GND 98%
3V3pin 3Connected to: 3.3V 82% · a signal 18%
IO0pin 4Connected to: Signal 82%
  • Pull-up to 3.3V on 36% · 10 kΩ (3), 5.1 kΩ (1)
IO16pin 20Connected to: Not connected 64% · a signal 27%
IO21pin 25Connected to: Not connected 60% · a signal 30%
IO26pin 26Connected to: Not connected 90%
IO47pin 27Connected to: Not connected 60% · a signal 30%
IO48pin 30Connected to: Not connected 60% · a signal 40%
IO41pin 37Connected to: Not connected 60% · a signal 40%
IO42pin 38Connected to: Not connected 60% · a signal 40%
IO45pin 41Connected to: Not connected 70% · a signal 30%
IO46pin 44Connected to: Not connected 70% · a signal 30%
ENpin 45Connected to: Signal 100%
  • Capacitor to GND on 100% · 1 µF (7), 100 nF (6)
  • Pull-up to 3.3V on 90% · 10 kΩ (8)
  • Series resistor on 30% · 470 Ω (1), 0 Ω (1), 10 kΩ (1)

29 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bwlc1a by teapotlaboratories, E badge by BYU-I-eBadge, Devotchi by hussamkoman and Plant as button-PCB by AlBarbe.

The ESP32-S3-MINI-1-N4R2 in open source designs

The gallery holds 16 open source boards using the ESP32-S3-MINI-1-N4R2 from 12 GitHub repositories; a typical one measures about 60 × 50 mm and carries around 53 components.

60% use four copper layers or more, and 38% carry an open source license.

The most starred is Bwlc1a by teapotlaboratories.

Parts used alongside the ESP32-S3-MINI-1-N4R2

Microcontrollers on boards using the ESP32-S3-MINI-1-N4R2

ESP32-S3-MINI-1-N4R2: common questions

Where can I find a ESP32-S3-MINI-1-N4R2 reference design?

Each of the 16 boards on this page is a real design using the ESP32-S3-MINI-1-N4R2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ESP32-S3-MINI-1-N4R2 EN pin connected?

The EN pin has a capacitor to GND on 10 of 10 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 11 open source designs using the ESP32-S3-MINI-1-N4R2.

How is the ESP32-S3-MINI-1-N4R2 3V3 pin connected?

The 3V3 pin is tied to 3.3V on 9 of 11 designs (a signal on 2). Counted from the KiCad layouts of 11 open source designs using the ESP32-S3-MINI-1-N4R2.

How is the ESP32-S3-MINI-1-N4R2 IO26 pin connected?

The IO26 pin is left unconnected on 9 of 10 designs. Counted from the KiCad layouts of 11 open source designs using the ESP32-S3-MINI-1-N4R2.

What parts are used alongside the ESP32-S3-MINI-1-N4R2?

The AP63203WU-7, BQ25185DLHR, MAX17048G+T10 and TPS2121RUXR appear in the most repositories here.

Which microcontrollers do boards using the ESP32-S3-MINI-1-N4R2 use?

Most are built on ESP32 (16).

How big is a typical board using the ESP32-S3-MINI-1-N4R2?

The median is 60 × 50 mm, and 40% are two-layer designs.

What is the most popular open source board using the ESP32-S3-MINI-1-N4R2?

By GitHub stars, Bwlc1a by teapotlaboratories, with 2 stars.

Can I simulate one of these boards using the ESP32-S3-MINI-1-N4R2 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part