Weathion
timkoval·weathion·pcb/weathion-display/weathion-display.kicad_pcb
About the Weathion PCB
Weathion is an open source ESP8266 PCB design by timkoval, published on GitHub under the MIT license. It is a 2-layer board measuring 45.1 × 33.7 mm, with 18 components from 10 distinct parts.
Its main chip is the ESP12, from the ESP8266 family. Other key parts include the AMS1117. By type, the board carries 6 capacitors, 5 resistors, 3 connectors, 2 ICs and 1 crystal.
It belongs with the displays & leds, sensors and iot & wireless designs in this gallery.
From the project
Weathion is yet another weather station project
Weathion is yet another weather station project.
This project is based on ESP8266 MCU that allows to interact with it using WiFi. Moreover, you can connect Nextion display if you want. I've added the ability just because I had this display :) As for sensors, it has I2C interface to connect any sensor that supports I2C (I'm planning to use BME280) and MQ series gas sensor interface (e.g. MQ2).
Main components on the Weathion
Weathion bill of materials (BOM)
18 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117 | SOT-223 | U1 |
| 1 | ESP12 | ESP-12E | U2 |
| 1 | MOLEX_47346-0001 | USB_Micro-B_Molex_47346-0001 | X1 |
| 3 | Header_01x02 | PinHeader_1x02_P2.54mm_Vertical | J2, J3, J7 |
| 1 | BME280 | PinHeader_1x04_P2.54mm_Vertical | BME280 |
| 4 | 0.1uF | C_0603 | C1, C3, C4, C5 |
| 2 | 10uF | C_0603 | C2, C6 |
| 2 | 4.7k | R_0603 | R1, R4 |
| 2 | 10k | R_0603 | R2, R3 |
| 1 | 1k | R_0603 | R5 |
Weathion design files
The KiCad project lives in the timkoval/weathion repository on GitHub; these links point at the commit this page was built from.
Weathion: common questions
What microcontroller does the Weathion use?
The Weathion is built around the ESP12, from the ESP8266 family.
How big is the Weathion PCB?
The Weathion measures 45.1 × 33.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Weathion?
18 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Weathion design files?
From the timkoval/weathion repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Weathion design in my own project?
Yes, under the terms of its MIT license, which timkoval chose for the repository.
Can I test firmware for the Weathion without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398