Hat zero brick
Tinkerforge·hat-zero-brick·hardware/hat-zero.kicad_pcb
About the Hat zero brick
Hat zero brick is an open source Raspberry Pi PCB design by Tinkerforge, published on GitHub. It is a 2-layer board measuring 65 × 30.6 mm, with 40 components from 17 distinct parts.
Its main chip is the Raspberry_Pi_Zero, from the Raspberry Pi family. Other key parts include the XMC1100, LD1117 and 74AHC244. By type, the board carries 9 capacitors, 7 connectors, 6 resistors, 4 ICs, 1 diode and 1 inductor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
HAT for Raspberry Pi Zero with 4 Bricklets ports
This repository contains the firmware source code and the hardware design files. The documentation generator configs can be found at https://github.com/Tinkerforge/generators
software/: examples/: Examples for all supported languages build/: Compiled files src/: Source code of firmware Makefile: Makefile to build project
hardware/: * Contains KiCad project files and additionally schematics as PDF
Main components on the Hat zero brick
Hat zero brick bill of materials (BOM)
40 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XMC1100 | QFN24-4x4mm-0.5mm | U101 |
| 1 | LD1117 | SOT-223 | U102 |
| 2 | 74AHC244 | TSSOP20 | U201, U202 |
| 1 | Boot | SolderJumper | J101 |
| 1 | Raspberry_Pi_Zero | raspberrypi_zero_hat | J102 |
| 1 | Debug | DEBUG_PAD | P101 |
| 4 | CON-SENSOR2 | CON-SENSOR2 | P201, P202, P203, P204 |
| 4 | 220pF | 4X0402 | CP201, CP202, CP203, CP204 |
| 1 | 10k | 4X0603 | RP102 |
| 1 | 3.9k | 4X0402 | RP103 |
| 6 | 82 | 4X0402 | RP104, RP106, RP201, RP202, RP203, RP204 |
| 1 | blue | D0603F | D101 |
| 1 | FB | R0805 | L101 |
| 5 | 100nF | C0603F | C101, C104, C106, C201, C202 |
| 4 | 10uF | C1206 | C102, C103, C105, C107 |
| 4 | 100k | R0402F | R1, R2, R3, R4 |
| 2 | 1k | R0603F | R101, R102 |
Hat zero brick design files
The KiCad project lives in the Tinkerforge/hat-zero-brick repository on GitHub; these links point at the commit this page was built from.
Hat zero brick: common questions
What microcontroller does the Hat zero brick use?
The Hat zero brick is built around the Raspberry_Pi_Zero, from the Raspberry Pi family.
How big is the Hat zero brick?
The Hat zero brick measures 65 × 30.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hat zero brick?
40 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hat zero brick design files?
From the Tinkerforge/hat-zero-brick repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Hat zero brick design in my own project?
The repository has no license, so all rights stay with Tinkerforge. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Hat zero brick without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507