10 open source boards using the 74AHC244
Real designs built with the 74AHC244, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Main board
esl-epfl
144.3 × 143.8 mm253 parts4LNo license11GCM
JonathSpirit
203 × 116 mm123 parts4LCERN-OHL-W-2.03Main board
esl-epfl
144.3 × 143.8 mm259 parts4LNo license2Mems array
lfochamon
350 × 190 mm57 parts2LNo license2Microchip SAM
Romi unified board advanced
WPIRoboticsEngineering
125.1 × 125.7 mm91 parts4LNo license1ESP32
Warp esp32-ethernet v2-brick
Tinkerforge
116.5 × 57.5 mm211 parts4LNo license0Raspberry Pi
Hat zero brick
Tinkerforge
65 × 30.6 mm40 parts2LNo license0Vna mm ref
loxodes
115.5 × 66 mm210 parts4LNo license205AVR/Arduino
Vga
agkaminski
129.5 × 74.2 mm36 parts2LNo license1RP2040/RP2350
Piggyback 3v3
ForgottenMachines
368.3 × 90.8 mm22 parts2LNo license5
How designs wire the 74AHC244
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 74AHC244 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 2Y0pin 3 | Connected to: Signal 60% · not connected 40% |
|
| 2Y1pin 5 | Connected to: Signal 80% · not connected 20% |
|
| 1A2pin 6 | Connected to: A connector 30%, TCAL6416 20%, another IC 20% |
|
| 2Y2pin 7 | Connected to: Signal 80% · not connected 20% |
|
| 1A3pin 8 | Connected to: A connector 20%, TCAL6416 20%, another IC 20% · not connected 20% |
|
| 2Y3pin 9 | Connected to: 74AHC244 30% · not connected 20% |
|
| GNDpin 10 | Connected to: GND 100% | — |
| 1Y3pin 12 | Connected to: 74AHC244 30% · not connected 30% |
|
| 1Y2pin 14 | Connected to: Signal 70% · not connected 30% |
|
| 1Y1pin 16 | Connected to: A connector 20% · not connected 20% |
|
| 1Y0pin 18 | Connected to: A connector 30% · not connected 30% |
|
| VCCpin 20 | Connected to: 3.3V 90% |
|
8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Vna mm ref by loxodes, Main board by esl-epfl, Piggyback 3v3 by ForgottenMachines and GCM by JonathSpirit.
The 74AHC244 in open source designs
The gallery holds 10 open source boards using the 74AHC244 from 10 GitHub repositories; a typical one measures about 136.9 × 103.4 mm and carries around 107 components.
60% use four copper layers or more, and 10% carry an open source license.
The most starred is Vna mm ref by loxodes.
Parts used alongside the 74AHC244
Microcontrollers on boards using the 74AHC244
What boards using the 74AHC244 are built for
74AHC244: common questions
Where can I find a 74AHC244 reference design?
Each of the 10 boards on this page is a real design using the 74AHC244. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74AHC244 VCC pin?
The VCC pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the 74AHC244.
What parts are used alongside the 74AHC244?
The 74AHC1G04, 24AA02E-OT, 74AHCT1G08, BIWIN_DTS04GE_SMD and FT4232HL appear in the most repositories here.
Which microcontrollers do boards using the 74AHC244 use?
Most are built on AVR/Arduino (1), ESP32 (1), Raspberry Pi (1) and RP2040/RP2350 (1).
How big is a typical board using the 74AHC244?
The median is 136.9 × 103.4 mm, and 40% are two-layer designs.
What is the most popular open source board using the 74AHC244?
By GitHub stars, Vna mm ref by loxodes, with 205 stars.
Can I simulate one of these boards using the 74AHC244 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.