HardLabs

Full

TMANTsmith·daisy-esp32-guitar-pedal·full-pcb/full_pcb.kicad_pcb

Full PCB layout, top view — open source ESP32 board by TMANTsmith
Simulate this board

About the Full PCB

Full is an open source ESP32 PCB design by TMANTsmith, published on GitHub. It is a 4-layer board measuring 54 × 106 mm, with 51 components from 24 distinct parts.

Its main chip is the C5371993, from the ESP32 family. Other key parts include the C69414, C9864, C71136, C3113 and C50984. By type, the board carries 18 capacitors, 16 resistors, 4 ICs, 4 diodes, 2 modules and 2 inductors.

It belongs with the audio and iot & wireless designs in this gallery.

From the project

esp23 + daisy guitar pedal

This is a guitar pedal with the goal of combining the audio processing power of the Daisy Seed with the wifi capabilities of the Esp32C series (currently only testing the C6). This way you can fully control the guitar pedal with your phone connected by a website hosted by the esp32 and for low-latantcy tasks physical buttons will be on the board. This will allow for greator flexability through the user being able to add or remove buttons by making changes to the website allowing them to have any configuration they want.

Full, from the project README
From the project README

Main components on the Full

C69414C9864C71136C3113C50984C5371993

Full bill of materials (BOM)

51 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C69414
OPA1664D
U1
1
C9864
TPS5430DDA
U2
1
C71136
78L05G-AB3-R
U3
1
C3113
CJ431
U4
1
C50984
Electrosmith_Daisy_Seed_Rev4 (2 1x20 pin headers required)
A1
1
C5371993
XIAO-ESP32-C6-DIP (2 1x7 pin headers required)
A2
1
C16214
Barrel_Jack_Switch
J6
4
TestPoint
5VA1, 5VD1, 9V1, GND1
1
C2480
SS14
D1
2
C8678
SS34
D2, D3
1
C2297
LED
D4
1
C14709
120Ω@100MHz
FB1
1
C168130
18uH
L1
6
C49678
0.1uf
C1, C2, C14, C17, C18, C19
7
C440198
10uf
C3, C4, C5, C6, C8, C9, C13
2
C28260
2.2nf
C7, C10
1
C1710
0.01uf
C11
1
C242173
220uf
C15
1
C1740
0.33uf
C16
3
C22775
100
R1, R8, R11
Show 4 more
QtyPartRefs
3
C25804
10k
R2, R13, R16
6
C22976
2M
R3, R4, R5, R6, R9, R12
3
C22978
3.3K
R7, R10, R14
1
C21190
1k
R15

Full design files

The KiCad project lives in the TMANTsmith/daisy-esp32-guitar-pedal repository on GitHub; these links point at the commit this page was built from.

Full: common questions

What microcontroller does the Full use?

The Full is built around the C5371993, from the ESP32 family.

How big is the Full PCB?

The Full measures 54 × 106 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Full?

51 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Full design files?

From the TMANTsmith/daisy-esp32-guitar-pedal repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Full design in my own project?

The repository has no license, so all rights stay with TMANTsmith. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Full without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in daisy-esp32-guitar-pedal

Similar boards