Divine light
tobycm·divine-light·pcb/divine-light.kicad_pcb
About the Divine light PCB
Divine light is an open source RISC-V PCB design by tobycm, published on GitHub under the MIT license. It is a 2-layer board measuring 90 × 55 mm, with 83 components from 30 distinct parts.
Its main chip is the CH572D, from the RISC-V family. Other key parts include the IP2326, HY2120-CB, USBLC6-2SC6, TPS54308 and SS12D10G6-WJ. By type, the board carries 33 diodes, 14 capacitors, 14 resistors, 6 ICs, 5 connectors and 5 inductors.
It belongs with the iot & wireless and displays & leds designs in this gallery.
From the project
A handheld device with neopixels so you can have lights wherever you want :b
Main components on the Divine light
Divine light bill of materials (BOM)
83 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IP2326 INJOINIC(英集芯) | VQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U1 |
| 1 | HY2120-CB HY2120CB HYCON(宏康) | SOT-23-6 | U2 |
| 1 | CH572D WCH(南京沁恒) | QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm | U3 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U4 |
| 1 | TPS54308 | SOT-23-6 | U5 |
| 1 | SS12D10G6-WJ SHOU HAN(首韩) | SW-TH_3P-P4.80_HX-SS12D10G6-WJ | U6 |
| 1 | FS8205A TECH PUBLIC(台舟) | SOT-23-6 | Q1 |
| 1 | 32Mhz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 2 | Battery_JST | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1, J2 |
| 3 | USB_C_Receptacle_USB2.0_14P | USB-C-SMD_TYPE-C-16PIN-2MD-073 | J3, J4, J5 |
| 1 | Antenna_Shield | ANT-F-1-2.4G-1.6MM-FR4-WCH | AE2 |
| 1 | 2A | Fuse_1206_3216Metric | F1 |
| 1 | 1A | Fuse_0805_2012Metric | F2 |
| 1 | 100k @ 3950K | R_0603_1608Metric | TH1 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 32 | SK6812 | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D2, D3, D4, D5, D6, D7, D8, D9 +24 |
| 2 | 220Ω@100MHz | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB1, FB2 |
| 2 | 2.2u | L_APV_APH0630 | L1, L2 |
| 1 | L | L_0603_1608Metric | L3 |
| 4 | 100n | C_0603_1608Metric | C1, C2, C5, C6 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 8p | C_0603_1608Metric | C3, C4 |
| 6 | 22u | C_0805_2012Metric | C7, C8, C9, C10, C11, C14 |
| 2 | C | C_0603_1608Metric | C12, C13 |
| 3 | 330 | R_0603_1608Metric | R1, R5, R14 |
| 1 | 2k | R_0805_2012Metric | R2 |
| 4 | 5.1k | R_0603_1608Metric | R3, R4, R9, R10 |
| 1 | 10k | R_0603_1608Metric | R6 |
| 3 | 56k | R_0603_1608Metric | R7, R11, R12 |
| 1 | 90k | R_1206_3216Metric | R8 |
| 1 | 82k | R_0603_1608Metric | R13 |
Divine light design files
The KiCad project lives in the tobycm/divine-light repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/divine-light.kicad_pcb
- Schematicpcb/divine-light.kicad_sch
Divine light: common questions
What microcontroller does the Divine light use?
The Divine light is built around the CH572D, from the RISC-V family.
How big is the Divine light PCB?
The Divine light measures 90 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Divine light?
83 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Divine light design files?
From the tobycm/divine-light repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Divine light design in my own project?
Yes, under the terms of its MIT license, which tobycm chose for the repository.
Can I test firmware for the Divine light without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105