Skibidi usb hub
tobycm·skibidi-usb-hub·pcb/skibidi-usb-hub.kicad_pcb
About the Skibidi usb hub PCB
Skibidi usb hub is an open source PCB design by tobycm, published on GitHub under the MIT license. It is a 4-layer board measuring 50 × 65 mm, with 83 components from 23 distinct parts.
Other key parts include the CH334F_C5187527, CH217K, GT-USB-7010ASV, RTL8152B-VB-CG and HS-100B. By type, the board carries 44 capacitors, 19 resistors, 10 ICs, 2 crystals, 2 switches and 2 transformers.
It belongs with the usb & debug tools and power & battery designs in this gallery.
From the project
grrrr imagine having low power usb ports, throw a buck reg in there 🔥
me when my ethernet port and audio jack is broken and i need more usb A ports :bonk:
features: - 1 USB C port for upstream - 2 USB C ports - 2 USB A ports - 2 100M capable Ethernet ports - 1 Audio Jack (maybe both line in and line out)
JLCPCB Params: - Stack up: JLC04161H-7628
Main components on the Skibidi usb hub
Skibidi usb hub bill of materials (BOM)
83 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CH334F_C5187527 | QFN-24_L4.0-W4.0-P0.50-BL-EP2.8 | U1, U8 |
| 1 | CH217K | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U2 |
| 3 | GT-USB-7010ASV | USB-C-SMD_G-SWITCH_GT-USB-7010ASV | U3, U4, U6 |
| 2 | RTL8152B-VB-CG | QFN-24_L4.0-W4.0-P0.50-BL-EP2.0 | U5, U7 |
| 1 | HS-100B | LQFP-48_L7.0-W7.0-P0.50-LS9.0-BL | U9 |
| 1 | C18185602 PJ-320A-4P DIP | AUDIO-TH_PJ-320A-4P-DIP | U10 |
| 2 | X322516MLB4SI | OSC-SMD_4P-L3.2-W2.5-BL | X1, X2 |
| 2 | R-RJ45S08P-C000 | RJ45-TH_R-RJ45S08P-C000 | RJ1, RJ2 |
| 2 | B3U-1100PM | SW-SMD_3P-L3.0-W2.5-LS4.0 | SW1, SW2 |
| 2 | H1102NLT_C20623173 | XFMR-SMD_H1102NLT | T1, T2 |
| 2 | C456018 AF 90° WJDG | USB-A-TH_AF-WJDG | USB1, USB2 |
| 9 | 100N 100n | C_0402_1005Metric | C1, C3, C7, C19, C21, C23, C27, C29 +1 |
| 19 | 1u | C_0402_1005Metric | C2, C4, C9, C10, C12, C14, C16, C18 +11 |
| 1 | 10U 10u | C_0603_1608Metric | C5 |
| 1 | 47U 47u | C_0805_2012Metric | C6 |
| 6 | 100U 100u | C_1206_3216Metric | C8, C11, C13, C15, C17, C25 |
| 4 | 10N 10n | C_0402_1005Metric | C37, C38, C39, C40 |
| 4 | 1n | C_1206_3216Metric | C41, C42, C43, C44 |
| 3 | 56K 56k | R_0402_1005Metric | R1, R3, R4 |
| 2 | 2.49K 2.49k | R_0402_1005Metric | R2, R5 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 5.1K 5.1k | R_0402_1005Metric | R6, R7 |
| 8 | 75 | R_0402_1005Metric | R8, R9, R10, R11, R12, R13, R14, R15 |
| 4 | 470 | R_0402_1005Metric | R16, R17, R18, R19 |
Skibidi usb hub design files
The KiCad project lives in the tobycm/skibidi-usb-hub repository on GitHub; these links point at the commit this page was built from.
Skibidi usb hub: common questions
How big is the Skibidi usb hub PCB?
The Skibidi usb hub measures 50 × 65 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Skibidi usb hub?
83 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Skibidi usb hub design files?
From the tobycm/skibidi-usb-hub repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Skibidi usb hub design in my own project?
Yes, under the terms of its MIT license, which tobycm chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k