20 open source boards using the CH217K
Real designs built with the CH217K, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Dino z80
rh1tech
99.5 × 80 mm258 parts4LGPL-3.03Konoha
aisuneko
80 × 80 mm97 parts4LCERN-OHL-S-2.01Usb hub
snakeye
100 × 45 mm39 parts4LMIT1Artificer-A1-Single-Board-Computer
MattSpot10
115 × 90 mm486 parts6LMIT0ESP32
ESP32-S3
syamei0
95 × 72 mm142 parts2LNo license0Skibidi usb hub
tobycm
50 × 65 mm83 parts4LMIT0STM32
UsbMeter
TheBadZhang
17.5 × 50 mm68 parts4LNo license0RP2040/RP2350
Frank next
rh1tech
99 × 54 mm245 parts4LGPL-3.065RP2040/RP2350
Xt8086 beta
rh1tech
99.5 × 80 mm239 parts4LGPL-3.03ESP32
Syamei0 MD
syamei0
3.2 × 3.2 mm132 parts2LNo license0STM32
UsbMeter2
TheBadZhang
17.5 × 40.3 mm40 parts2LNo license0RP2040/RP2350
Frank next proto
rh1tech
80.6 × 54 mm204 parts4LGPL-3.03ESP32
ESP32 SMD
syamei0
95 × 72 mm113 parts2LNo license0WCH CH32/CH55x
Ch32x035-promicro usb device
74th
17.8 × 31.8 mm24 parts2LMIT10RP2040/RP2350
Frank core2
rh1tech
80.6 × 54 mm190 parts4LGPL-3.03RISC-V
RVSWDIO Programmer
74th
15.5 × 36.6 mm21 parts2LMIT10ESP32
WiFi KeyMouse
74th
20 × 42.4 mm26 parts2LMIT174TH-G070-USB Power Adapter
74th
36 × 23 mm20 parts2LMIT1RISC-V
Ch32v003 test board
74th
50 × 54 mm20 parts2LMIT1RISC-V
Power Switch Adapter
74th
20.3 × 33.3 mm11 parts2LMIT1
How designs wire the CH217K
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the CH217K connects to, and the resistors, capacitors and other passives placed on it.
- The ISET pin has a resistor to GND on 10 of 10 designs, most often 100 kΩ (then 22 kΩ).
- The VIN pin has a decoupling capacitor on 6 of 10 designs, most often 10 µF (then 1 µF).
- The VOUT pin has a decoupling capacitor on 5 of 10 designs, most often 22 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VOUTpin 1 | Connected to: 5V 80% · a signal 20% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| ISETpin 5 | Connected to: Signal 100% |
|
| VINpin 6 | Connected to: VBUS 100% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Frank next by rh1tech, Ch32x035-promicro usb device by 74th, Dino z80 by rh1tech and WiFi KeyMouse by 74th.
The CH217K in open source designs
The gallery holds 20 open source boards using the CH217K from 10 GitHub repositories; a typical one measures about 65 × 54 mm and carries around 90 components.
50% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Frank next by rh1tech.
Parts used alongside the CH217K
Microcontrollers on boards using the CH217K
What boards using the CH217K are built for
CH217K: common questions
Where can I find a CH217K reference design?
Each of the 20 boards on this page is a real design using the CH217K. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the CH217K ISET pin?
The ISET pin has a resistor to GND on 10 of 10 designs, most often 100 kΩ (then 22 kΩ). Counted from the KiCad layouts of 10 open source designs using the CH217K.
What decoupling capacitors do designs use on the CH217K VIN pin?
The VIN pin has a decoupling capacitor on 6 of 10 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the CH217K.
What decoupling capacitors do designs use on the CH217K VOUT pin?
The VOUT pin has a decoupling capacitor on 5 of 10 designs, most often 22 µF (then 100 nF). Counted from the KiCad layouts of 10 open source designs using the CH217K.
What parts are used alongside the CH217K?
The USBLC6-2SC6, 74HC4052BQ,115, AMS1117, AO3401A and APS6404L-3SQR-ZR appear in the most repositories here.
Which microcontrollers do boards using the CH217K use?
Most are built on RP2040/RP2350 (5), ESP32 (4), RISC-V (3) and STM32 (2).
How big is a typical board using the CH217K?
The median is 65 × 54 mm, and 50% are two-layer designs.
What is the most popular open source board using the CH217K?
By GitHub stars, Frank next by rh1tech, with 65 stars.
Can I simulate one of these boards using the CH217K before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.