18650BatteryModule
tokai-student-rocket-project·H-62-Avionics·KiCAD/18650BatteryModule/18650BatteryModule.kicad_pcb
About the 18650BatteryModule PCB
18650BatteryModule is an open source PCB design by tokai-student-rocket-project, published on GitHub. It is a 2-layer board measuring 93.9 × 70 mm, with 11 components from 8 distinct parts.
By type, the board carries 4 battery holders, 2 connectors, 2 test points, 1 fuse, 1 diode and 1 resistor.
From the project
H-62搭載計器 すばる1.3 | 2025年度 夏季 能代 NOGO
- 水密機能の搭載 - 基板径をΦ90に変更 - LYLYGO開発ボードを活用した地上局
Flight : 搭載計器のソースコード - Flight Module - Power Module - Sensing Module - Valve Control Module
Ground : 地上局のソースコード - Ground Flight Module - Ground Sensing Module - Sea Flight Module - Teleplot Ground Flight Module - Teleplot Layout
LogDumper : ログ読み出しのソースコード - Flight Module - Sensing Module
18650BatteryModule bill of materials (BOM)
11 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DF1B-2S-2.5R | DF1B-2S-2.5R | J1 |
| 1 | DF11-8DP-2DS | DF11-8DP-2DS | J2 |
| 4 | 1042 | BAT_1042 | BT1, BT2, BT3, BT4 |
| 1 | Polyfuse | Fuse_Bourns_MF-RHT300 | F1 |
| 1 | TestPoint | TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1 |
| 1 | TestPoint_GND | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP2 |
| 1 | Green | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | 2.4KR 2.4kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
18650BatteryModule design files
The KiCad project lives in the tokai-student-rocket-project/H-62-Avionics repository on GitHub; these links point at the commit this page was built from.
18650BatteryModule: common questions
How big is the 18650BatteryModule PCB?
The 18650BatteryModule measures 93.9 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 18650BatteryModule?
11 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 18650BatteryModule design files?
From the tokai-student-rocket-project/H-62-Avionics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 18650BatteryModule design in my own project?
The repository has no license, so all rights stay with tokai-student-rocket-project. Use it as a reference, and ask the author before reusing the design.
More boards in H-62-Avionics
RP2040/RP2350
PowerControlModule
tokai-student-rocket-project
90 × 70 mm80 parts2LNo license0AVR/Arduino
FlightModule
tokai-student-rocket-project
90 × 70 mm70 parts2LNo license0RP2040/RP2350
ValveControlModule
tokai-student-rocket-project
90 × 70 mm48 parts2LNo license0Renesas
THRValveControlModule
tokai-student-rocket-project
99 × 75 mm46 parts2LNo license0AVR/Arduino
SensingModule
tokai-student-rocket-project
90 × 70 mm44 parts2LNo license0PowerModule
tokai-student-rocket-project
90 × 70 mm41 parts2LNo license0AVR/Arduino
MKRGPSShield V4.0
tokai-student-rocket-project
45.7 × 25 mm34 parts2LNo license0SubaruPlate
tokai-student-rocket-project
140 × 140 mm12 parts2LNo license0BatteryModule
tokai-student-rocket-project
90 × 70 mm12 parts2LNo license0FeRAMTestBoard
tokai-student-rocket-project
21.3 × 21.3 mm5 parts2LNo license0