ValveControlModule
tokai-student-rocket-project·H-62-Avionics·KiCAD/ValveControlModule/ValveControlModule.kicad_pcb
About the ValveControlModule PCB
ValveControlModule is an open source RP2040/RP2350 PCB design by tokai-student-rocket-project, published on GitHub. It is a 2-layer board measuring 90 × 70 mm, with 48 components from 29 distinct parts.
Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. Other key parts include the LT1785XS8, MCP2515-XSO, MCP2562-E-SN, NCV8114BSN330T1G and MB85RQ8MX. By type, the board carries 16 capacitors, 13 resistors, 8 ICs, 3 transistors, 3 connectors and 3 diodes.
From the project
H-62搭載計器 すばる1.3 | 2025年度 夏季 能代 NOGO
- 水密機能の搭載 - 基板径をΦ90に変更 - LYLYGO開発ボードを活用した地上局
Flight : 搭載計器のソースコード - Flight Module - Power Module - Sensing Module - Valve Control Module
Ground : 地上局のソースコード - Ground Flight Module - Ground Sensing Module - Sea Flight Module - Teleplot Ground Flight Module - Teleplot Layout
LogDumper : ログ読み出しのソースコード - Flight Module - Sensing Module
Main components on the ValveControlModule
ValveControlModule bill of materials (BOM)
48 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-RP2040-DIP | XIAO-RP2040-SMD | U1 |
| 1 | LT1785XS8 LT1785xS8 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MCP2515-XSO MCP2515-xSO | SOIC-18W_7.5x11.6mm_P1.27mm | U3 |
| 1 | MCP2562-E-SN | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | NCV8114BSN330T1G | TSOT-23-5 | U5 |
| 1 | MB85RQ8MX | SOIC-16W_7.5x10.3mm_P1.27mm | U6 |
| 2 | TC7S14F | TSOT-23-5_HandSoldering | U8, U9 |
| 2 | AO3401A | SOT-23_Handsoldering | Q2, Q4 |
| 1 | AO3400A | SOT-23_Handsoldering | Q3 |
| 1 | 8MHZ 8MHz | Crystal_HC49-4H_Vertical | Y1 |
| 2 | DF51A-4P-2DS | DF51A-4P-2DS | J1, J3 |
| 1 | DF11-8DP-2DS | DF11-8DP-2DS | J2 |
| 1 | M78AR05-0.5 | M78AR03305 | PS1 |
| 1 | SMAJ45A | D_SMA | D1 |
| 1 | Green | LED_0603_1608Metric | D3 |
| 1 | SB34AFC | D_SMA_Handsoldering | D9 |
| 9 | 0.1UF 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C4, C5, C11, C12, C13, C14 +1 |
| 2 | 15PF 15pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7 |
| 2 | 1UF 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10 |
| 1 | 330UF 330uF | CP_Elec_10x10 | C15 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100UF 100uF | CP_Radial_D8.0mm_P3.50mm | C16 |
| 1 | 22UF 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17 |
| 2 | 120 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R6 |
| 1 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 4.7K 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 820R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 2.4KR 2.4kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 6 | 10KR 10kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R14, R24, R25, R26, R27 |
| 1 | 100KR 100kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
ValveControlModule design files
The KiCad project lives in the tokai-student-rocket-project/H-62-Avionics repository on GitHub; these links point at the commit this page was built from.
ValveControlModule: common questions
What microcontroller does the ValveControlModule use?
The ValveControlModule is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.
How big is the ValveControlModule PCB?
The ValveControlModule measures 90 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ValveControlModule?
48 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ValveControlModule design files?
From the tokai-student-rocket-project/H-62-Avionics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ValveControlModule design in my own project?
The repository has no license, so all rights stay with tokai-student-rocket-project. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ValveControlModule without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in H-62-Avionics
RP2040/RP2350
PowerControlModule
tokai-student-rocket-project
90 × 70 mm80 parts2LNo license0AVR/Arduino
FlightModule
tokai-student-rocket-project
90 × 70 mm70 parts2LNo license0Renesas
THRValveControlModule
tokai-student-rocket-project
99 × 75 mm46 parts2LNo license0AVR/Arduino
SensingModule
tokai-student-rocket-project
90 × 70 mm44 parts2LNo license0PowerModule
tokai-student-rocket-project
90 × 70 mm41 parts2LNo license0AVR/Arduino
MKRGPSShield V4.0
tokai-student-rocket-project
45.7 × 25 mm34 parts2LNo license0SubaruPlate
tokai-student-rocket-project
140 × 140 mm12 parts2LNo license0BatteryModule
tokai-student-rocket-project
90 × 70 mm12 parts2LNo license018650BatteryModule
tokai-student-rocket-project
93.9 × 70 mm11 parts2LNo license0FeRAMTestBoard
tokai-student-rocket-project
21.3 × 21.3 mm5 parts2LNo license0
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k