SubaruPlate
tokai-student-rocket-project·H-62-Avionics·KiCAD/SubaruPlate/SubaruPlate.kicad_pcb
About the SubaruPlate PCB
SubaruPlate is an open source PCB design by tokai-student-rocket-project, published on GitHub. It is a 2-layer board measuring 140 × 140 mm, with 12 components from 5 distinct parts.
Other key parts include the LPS28DFW. By type, the board carries 5 resistors, 4 capacitors, 2 ICs and 1 connector.
From the project
H-62搭載計器 すばる1.3 | 2025年度 夏季 能代 NOGO
- 水密機能の搭載 - 基板径をΦ90に変更 - LYLYGO開発ボードを活用した地上局
Flight : 搭載計器のソースコード - Flight Module - Power Module - Sensing Module - Valve Control Module
Ground : 地上局のソースコード - Ground Flight Module - Ground Sensing Module - Sea Flight Module - Teleplot Ground Flight Module - Teleplot Layout
LogDumper : ログ読み出しのソースコード - Flight Module - Sensing Module
Main components on the SubaruPlate
SubaruPlate bill of materials (BOM)
12 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LPS28DFW | CCLGA-7L | U1, U6 |
| 1 | Wire_Soldering | PinHeader_1x04_P1.27mm_Vertical | J1 |
| 2 | 10UF 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C14 |
| 2 | 0.1UF 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C13 |
| 5 | 10KR 10kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R14, R16 |
SubaruPlate design files
The KiCad project lives in the tokai-student-rocket-project/H-62-Avionics repository on GitHub; these links point at the commit this page was built from.
SubaruPlate: common questions
How big is the SubaruPlate PCB?
The SubaruPlate measures 140 × 140 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SubaruPlate?
12 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SubaruPlate design files?
From the tokai-student-rocket-project/H-62-Avionics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SubaruPlate design in my own project?
The repository has no license, so all rights stay with tokai-student-rocket-project. Use it as a reference, and ask the author before reusing the design.
More boards in H-62-Avionics
RP2040/RP2350
PowerControlModule
tokai-student-rocket-project
90 × 70 mm80 parts2LNo license0AVR/Arduino
FlightModule
tokai-student-rocket-project
90 × 70 mm70 parts2LNo license0RP2040/RP2350
ValveControlModule
tokai-student-rocket-project
90 × 70 mm48 parts2LNo license0Renesas
THRValveControlModule
tokai-student-rocket-project
99 × 75 mm46 parts2LNo license0AVR/Arduino
SensingModule
tokai-student-rocket-project
90 × 70 mm44 parts2LNo license0PowerModule
tokai-student-rocket-project
90 × 70 mm41 parts2LNo license0AVR/Arduino
MKRGPSShield V4.0
tokai-student-rocket-project
45.7 × 25 mm34 parts2LNo license0BatteryModule
tokai-student-rocket-project
90 × 70 mm12 parts2LNo license018650BatteryModule
tokai-student-rocket-project
93.9 × 70 mm11 parts2LNo license0FeRAMTestBoard
tokai-student-rocket-project
21.3 × 21.3 mm5 parts2LNo license0