FlightModule
tokai-student-rocket-project·H-62-Avionics·KiCAD/FlightModule/FlightModule.kicad_pcb
About the FlightModule PCB
FlightModule is an open source AVR/Arduino PCB design by tokai-student-rocket-project, published on GitHub. It is a 2-layer board measuring 90 × 70 mm, with 70 components from 30 distinct parts.
Its main chip is the ARDUINO_MKR_WAN_1310, from the AVR/Arduino family. Other key parts include the MB85RQ8MX, SAM-M8Q-0-10, NCV8114BSN330T1G, TC7S14F and MCP2562-E-SN. By type, the board carries 26 resistors, 15 capacitors, 11 diodes, 8 ICs, 3 transistors and 3 connectors.
From the project
H-62搭載計器 すばる1.3 | 2025年度 夏季 能代 NOGO
- 水密機能の搭載 - 基板径をΦ90に変更 - LYLYGO開発ボードを活用した地上局
Flight : 搭載計器のソースコード - Flight Module - Power Module - Sensing Module - Valve Control Module
Ground : 地上局のソースコード - Ground Flight Module - Ground Sensing Module - Sea Flight Module - Teleplot Ground Flight Module - Teleplot Layout
LogDumper : ログ読み出しのソースコード - Flight Module - Sensing Module
Main components on the FlightModule
FlightModule bill of materials (BOM)
70 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | MB85RQ8MX | SOIC-16W_7.5x10.3mm_P1.27mm | U1, U2, U4 |
| 1 | SAM-M8Q-0-10 | MODULE_SAM-M8Q-0-10 | U3 |
| 1 | NCV8114BSN330T1G | TSOT-23-5 | U5 |
| 1 | TC7S14F | TSOT-23-5_HandSoldering | U7 |
| 1 | MCP2562-E-SN | SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | MCP2515-XST MCP2515-xST | TSSOP-20_4.4x6.5mm_P0.65mm | U9 |
| 2 | AO3400A | SOT-23 | Q1, Q2 |
| 1 | 2SC3325-Y | SC-59_Handsoldering | Q3 |
| 1 | 8MHZ 8MHz | Crystal_SMD_HC49-SD | Y1 |
| 1 | DF11B-8DP-2DS | DF11-8DP-2DS | J1 |
| 1 | DF51-2P-2DS | DF51-2P-2DS | J4 |
| 1 | DF51A-4P-2DSA | DF51A-4P-2DSA | J5 |
| 1 | UGCM1205XP | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | M78AR05-0.5 | M78AR03305 | PS1 |
| 1 | ARDUINO_MKR_WAN_1310 | BOARD_ARDUINO_MKR_WAN_1310 | Ux1 |
| 5 | Blue | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D7, D12 |
| 3 | Green | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4, D8, D10 |
| 3 | GS1010FL | D_SOD-123F | D5, D9, D11 |
| 1 | 330UF 330uF | CP_Elec_10x10 | C1 |
| 8 | 0.1UF 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5, C8, C9, C13, C14, C15, C18 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 15PF 15pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7 |
| 4 | 1UF 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C11, C16, C17 |
| 7 | 4.7KR 4.7kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R22, R26, R29, R30, R31 |
| 5 | 680R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R13, R21 |
| 3 | 2.4KR 2.4kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R17, R20 |
| 1 | 120R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 6 | 10KR 10kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R16, R19, R23, R24, R25 |
| 2 | 300R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R18 |
| 1 | 100KR 100kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27 |
| 1 | 0R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R28 |
FlightModule design files
The KiCad project lives in the tokai-student-rocket-project/H-62-Avionics repository on GitHub; these links point at the commit this page was built from.
FlightModule: common questions
What microcontroller does the FlightModule use?
The FlightModule is built around the ARDUINO_MKR_WAN_1310, from the AVR/Arduino family.
How big is the FlightModule PCB?
The FlightModule measures 90 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FlightModule?
70 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the FlightModule design files?
From the tokai-student-rocket-project/H-62-Avionics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the FlightModule design in my own project?
The repository has no license, so all rights stay with tokai-student-rocket-project. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the FlightModule without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in H-62-Avionics
RP2040/RP2350
PowerControlModule
tokai-student-rocket-project
90 × 70 mm80 parts2LNo license0RP2040/RP2350
ValveControlModule
tokai-student-rocket-project
90 × 70 mm48 parts2LNo license0Renesas
THRValveControlModule
tokai-student-rocket-project
99 × 75 mm46 parts2LNo license0AVR/Arduino
SensingModule
tokai-student-rocket-project
90 × 70 mm44 parts2LNo license0PowerModule
tokai-student-rocket-project
90 × 70 mm41 parts2LNo license0AVR/Arduino
MKRGPSShield V4.0
tokai-student-rocket-project
45.7 × 25 mm34 parts2LNo license0SubaruPlate
tokai-student-rocket-project
140 × 140 mm12 parts2LNo license0BatteryModule
tokai-student-rocket-project
90 × 70 mm12 parts2LNo license018650BatteryModule
tokai-student-rocket-project
93.9 × 70 mm11 parts2LNo license0FeRAMTestBoard
tokai-student-rocket-project
21.3 × 21.3 mm5 parts2LNo license0
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k