BatteryModule
tokai-student-rocket-project·H-62-Avionics·KiCAD/BatteryModule/BatteryModule.kicad_pcb
About the BatteryModule PCB
BatteryModule is an open source PCB design by tokai-student-rocket-project, published on GitHub. It is a 2-layer board measuring 90 × 70 mm, with 12 components from 7 distinct parts.
By type, the board carries 5 battery holders, 2 connectors, 2 test points, 1 fuse, 1 diode and 1 resistor.
It belongs with the power & battery designs in this gallery.
From the project
H-62搭載計器 すばる1.3 | 2025年度 夏季 能代 NOGO
- 水密機能の搭載 - 基板径をΦ90に変更 - LYLYGO開発ボードを活用した地上局
Flight : 搭載計器のソースコード - Flight Module - Power Module - Sensing Module - Valve Control Module
Ground : 地上局のソースコード - Ground Flight Module - Ground Sensing Module - Sea Flight Module - Teleplot Ground Flight Module - Teleplot Layout
LogDumper : ログ読み出しのソースコード - Flight Module - Sensing Module
BatteryModule bill of materials (BOM)
12 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DF1B-2S-2.5R | DF1B-2S-2.5R | J2 |
| 1 | DF11-8DP-2DS | DF11-8DP-2DS | J3 |
| 5 | CR123A | BHC-CR123A | BT1, BT2, BT3, BT4, BT5 |
| 1 | Polyfuse | Fuse_Bourns_MF-RHT300 | F1 |
| 2 | TestPoint | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1, TP2 |
| 1 | Green | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | 2.4KR 2.4kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
BatteryModule design files
The KiCad project lives in the tokai-student-rocket-project/H-62-Avionics repository on GitHub; these links point at the commit this page was built from.
BatteryModule: common questions
How big is the BatteryModule PCB?
The BatteryModule measures 90 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BatteryModule?
12 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BatteryModule design files?
From the tokai-student-rocket-project/H-62-Avionics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BatteryModule design in my own project?
The repository has no license, so all rights stay with tokai-student-rocket-project. Use it as a reference, and ask the author before reusing the design.
More boards in H-62-Avionics
RP2040/RP2350
PowerControlModule
tokai-student-rocket-project
90 × 70 mm80 parts2LNo license0AVR/Arduino
FlightModule
tokai-student-rocket-project
90 × 70 mm70 parts2LNo license0RP2040/RP2350
ValveControlModule
tokai-student-rocket-project
90 × 70 mm48 parts2LNo license0Renesas
THRValveControlModule
tokai-student-rocket-project
99 × 75 mm46 parts2LNo license0AVR/Arduino
SensingModule
tokai-student-rocket-project
90 × 70 mm44 parts2LNo license0PowerModule
tokai-student-rocket-project
90 × 70 mm41 parts2LNo license0AVR/Arduino
MKRGPSShield V4.0
tokai-student-rocket-project
45.7 × 25 mm34 parts2LNo license0SubaruPlate
tokai-student-rocket-project
140 × 140 mm12 parts2LNo license018650BatteryModule
tokai-student-rocket-project
93.9 × 70 mm11 parts2LNo license0FeRAMTestBoard
tokai-student-rocket-project
21.3 × 21.3 mm5 parts2LNo license0
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k