Batt
Tomas0015·System-Q·BATT/batt.kicad_pcb
About the Batt PCB
Batt is an open source PCB design by Tomas0015, published on GitHub. It is a 2-layer board measuring 60 × 55 mm, with 4 components from 3 distinct parts.
By type, the board carries 2 battery holders, 1 connector and 1 diode.
It belongs with the power & battery designs in this gallery.
Batt bill of materials (BOM)
4 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 2 | Battery | BatteryHolder_Keystone_2468_2xAAA | BT1, BT2 |
| 1 | D | D_A-405_P10.16mm_Horizontal | D1 |
Batt design files
The KiCad project lives in the Tomas0015/System-Q repository on GitHub; these links point at the commit this page was built from.
- LayoutBATT/batt.kicad_pcb
- SchematicBATT/batt.kicad_sch
Batt: common questions
How big is the Batt PCB?
The Batt measures 60 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Batt?
4 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Batt design files?
From the Tomas0015/System-Q repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Batt design in my own project?
The repository has no license, so all rights stay with Tomas0015. Use it as a reference, and ask the author before reusing the design.
More boards in System-Q
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k