KEY
Tomas0015·System-Q·KEY/KEY.kicad_pcb
About the KEY PCB
KEY is an open source PCB design by Tomas0015, published on GitHub. It is a 2-layer board measuring 50 × 80 mm, with 25 components from 18 distinct parts.
Other key parts include the AP63203WU, WT8266-S1 and 74LVC138. By type, the board carries 6 resistors, 5 connectors, 5 capacitors, 3 ICs, 3 transistors and 1 buzzer.
It belongs with the power & battery designs in this gallery.
Main components on the KEY
KEY bill of materials (BOM)
25 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP63203WU | TSOT-23-6 | U1 |
| 1 | WT8266-S1 | WT8266-S1 | U2 |
| 1 | 74LVC138 | TSSOP-16_4.4x5mm_P0.65mm | U3 |
| 2 | BC846 | SOT-23 | Q1, Q2 |
| 1 | BC857 | SOT-23 | Q3 |
| 1 | BUS | TerminalBlock_Altech_AK300-4_P5.00mm | J1 |
| 1 | BATT_EXT | PinSocket_1x04_P2.54mm_Horizontal | J2 |
| 1 | FLASH/CONF | PinSocket_1x06_P2.54mm_Horizontal | J3 |
| 1 | KEYB | PinSocket_1x07_P2.54mm_Horizontal | J5 |
| 1 | RFID | PinSocket_1x06_P2.54mm_Horizontal | J6 |
| 1 | Buzzer | LPT2270AS | BZ1 |
| 1 | tamper switch | SW_PUSH_6mm | SW1 |
| 1 | 4u7 | L_Ferrocore_DLG-0504 | L1 |
| 1 | 10u 50V | CP_Elec_5x5.3 | C1 |
| 2 | 100n | C_0603_1608Metric | C2, C4 |
| 2 | 22u | C_0603_1608Metric | C3, C5 |
| 5 | 10k | R_0603_1608Metric | R1, R2, R3, R4, R8 |
| 1 | 820 | R_0603_1608Metric | R5 |
KEY design files
The KiCad project lives in the Tomas0015/System-Q repository on GitHub; these links point at the commit this page was built from.
- LayoutKEY/KEY.kicad_pcb
- SchematicKEY/KEY.kicad_sch
KEY: common questions
How big is the KEY PCB?
The KEY measures 50 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the KEY?
25 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the KEY design files?
From the Tomas0015/System-Q repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the KEY design in my own project?
The repository has no license, so all rights stay with Tomas0015. Use it as a reference, and ask the author before reusing the design.
More boards in System-Q
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k