PIR systém Q old
Tomas0015·System-Q·Universal module/PIR systém Q_old.kicad_pcb
About the PIR systém Q old PCB
PIR systém Q old is an open source PCB design by Tomas0015, published on GitHub. It is a 2-layer board measuring 50 × 80 mm, with 25 components from 19 distinct parts.
Other key parts include the AP63203WU and WT8266-S1. By type, the board carries 7 resistors, 5 capacitors, 4 connectors, 3 transistors, 2 ICs and 1 buzzer.
It belongs with the power & battery designs in this gallery.
Main components on the PIR systém Q old
PIR systém Q old bill of materials (BOM)
25 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP63203WU | TSOT-23-6 | U1 |
| 1 | WT8266-S1 | WT8266-S1 | U2 |
| 2 | BC846 | SOT-23 | Q1, Q2 |
| 1 | BC857 | SOT-23 | Q3 |
| 1 | FLASH | PinSocket_1x06_P2.54mm_Horizontal | J1 |
| 1 | PIR | PinSocket_1x03_P2.54mm_Vertical | J2 |
| 1 | BUS | TerminalBlock_Altech_AK300-4_P5.00mm | J3 |
| 1 | Conn_01x04_Socket | PinSocket_1x04_P2.54mm_Horizontal | J4 |
| 1 | Buzzer | LPT2270AS | BZ1 |
| 1 | tamper switch | SW_PUSH_6mm | SW1 |
| 1 | LED - R | LED_D5.0mm | D1 |
| 1 | 4u7 | L_Ferrocore_DLG-0504 | L1 |
| 1 | 10u 50V | CP_Elec_5x5.3 | C1 |
| 2 | 100n | C_0603_1608Metric | C2, C5 |
| 2 | 22u | C_0603_1608Metric | C3, C4 |
| 4 | 10k | R_0603_1608Metric | R1, R2, R5, R7 |
| 1 | 820 | R_0603_1608Metric | R3 |
| 1 | 100R | R_0603_1608Metric | R4 |
| 1 | 4k7 | R_0603_1608Metric | R6 |
PIR systém Q old design files
The KiCad project lives in the Tomas0015/System-Q repository on GitHub; these links point at the commit this page was built from.
PIR systém Q old: common questions
How big is the PIR systém Q old PCB?
The PIR systém Q old measures 50 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PIR systém Q old?
25 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the PIR systém Q old design files?
From the Tomas0015/System-Q repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PIR systém Q old design in my own project?
The repository has no license, so all rights stay with Tomas0015. Use it as a reference, and ask the author before reusing the design.
More boards in System-Q
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k