ESP32-S3-DevBoard
TomasD-git·ESP32-S3-DevBoard·ESP32-S3 DevBoard/ESP32-S3 DevBoard.kicad_pcb
About the ESP32-S3-DevBoard PCB
ESP32-S3-DevBoard is an open source ESP32 PCB design by TomasD-git, published on GitHub under the MIT license. It is a 4-layer board measuring 21.5 × 51.8 mm, with 42 components from 26 distinct parts.
Its main chip is the ESP32-S3R8, from the ESP32 family. Other key parts include the L327S400H11L, AMS1117-3.3 and GT-USB-7010ASV. By type, the board carries 21 capacitors, 6 resistors, 5 inductors, 4 ICs, 3 connectors and 2 switches.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
esp32 s3 devboard
Main components on the ESP32-S3-DevBoard
ESP32-S3-DevBoard bill of materials (BOM)
42 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3R8 ESP32-S3 ESPRESSIF(乐鑫) | QFN-56_L7.0-W7.0-P0.40-TL-EP4.0 | U1 |
| 1 | L327S400H11L Lucki(蓝晶) | CRYSTAL-SMD_4P-L3.2-W2.5-BL | U3 |
| 1 | AMS1117-3.3 AMS1117-3.3_C347222 UMW(友台半导体) | SOT-223-4_L6.5-W3.5-P2.30-LS7.0-BR | U4 |
| 1 | GT-USB-7010ASV G-Switch(品赞) | USB-C-SMD_G-SWITCH_GT-USB-7010ASV | U5 |
| 2 | CONN_01X20 Conn_01x20 | PinHeader_1x20_P2.54mm_Vertical | J1, J2 |
| 1 | CONN_01X02 Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | 2450AT18A100E JOHANSON(约翰逊) | ANT-SMD_L3.2-W1.6 | AE1 |
| 2 | TS-1088-AR02016 XUNPU(讯普) | SW-SMD_L3.9-W3.0-P4.45 | SW1, SW2 |
| 1 | 2.0NH 2.0nH | L_0201_0603Metric | L1 |
| 1 | 3.9NH 3.9nH | L_0201_0603Metric | L2 |
| 1 | 24NH 24nH | L_0201_0603Metric | L3 |
| 1 | 2.7NH 2.7nH | L_0201_0603Metric | L4 |
| 1 | 2NH 2nH | L_0201_0603Metric | L5 |
| 7 | 100NF 100nF | C_0201_0603Metric | C1, C2, C7, C9, C10, C15, C20 |
| 4 | 1UF 1uF | C_0402_1005Metric | C3, C6, C8, C19 |
| 3 | 10UF 10uF | C_0603_1608Metric | C4, C16, C18 |
| 1 | 10NF 10nF | C_0201_0603Metric | C5 |
| 1 | 1PF 1pF | C_0201_0603Metric | C11 |
| 1 | 1.2PF 1.2pF | C_0201_0603Metric | C12 |
| 2 | 11PF 12pF | C_0201_0603Metric | C13, C14 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 22UF 22uF | C_0805_2012Metric | C17 |
| 1 | 1.8PF 1.8pF | C_0201_0603Metric | C21 |
| 1 | 499 | R_0201_0603Metric | R1 |
| 1 | 10K | R_0201_0603Metric | R2 |
| 2 | 5.1K | R_0201_0603Metric | R3, R4 |
| 2 | 22 | R_0201_0603Metric | R5, R6 |
ESP32-S3-DevBoard design files
The KiCad project lives in the TomasD-git/ESP32-S3-DevBoard repository on GitHub; these links point at the commit this page was built from.
ESP32-S3-DevBoard: common questions
What microcontroller does the ESP32-S3-DevBoard use?
The ESP32-S3-DevBoard is built around the ESP32-S3R8, from the ESP32 family.
How big is the ESP32-S3-DevBoard PCB?
The ESP32-S3-DevBoard measures 21.5 × 51.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ESP32-S3-DevBoard?
42 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-S3-DevBoard design files?
From the TomasD-git/ESP32-S3-DevBoard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32-S3-DevBoard design in my own project?
Yes, under the terms of its MIT license, which TomasD-git chose for the repository.
Can I test firmware for the ESP32-S3-DevBoard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k