IMU-Module
TomasD-git·IMU-Module·IMU module/IMU module.kicad_pcb
About the IMU-Module
IMU-Module is an open source PCB design by TomasD-git, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 11 × 16.2 mm, with 14 components from 9 distinct parts.
Other key parts include the LSM6DSOXTR and XC6228D332VR-G. By type, the board carries 7 capacitors, 3 resistors, 2 ICs, 1 connector and 1 test point.
It belongs with the sensors designs in this gallery.
From the project
A very simple IMU module
In production folder, is lcsc bom which has all components ready to import to lcsc, and gerber files and placement if using pcba.
Main components on the IMU-Module
IMU-Module bill of materials (BOM)
14 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LSM6DSOXTR ST(意法半导体) | LGA-14L_L3.0-W2.5-P0.50-TL | U1 |
| 1 | XC6228D332VR-G TOREX(特瑞仕) | SOT-25-5_L3.0-W1.8-P0.95-LS3.0-BR | U2 |
| 1 | CONN_01X06 Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | TESTPOINT_2POLE TestPoint_2Pole | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | TP1 |
| 4 | 100NF 100nF | C_0402_1005Metric | C1, C4, C6, C7 |
| 2 | 1UF 1uF | C_0603_1608Metric | C2, C5 |
| 1 | 10UF 10uF | C_0805_2012Metric | C3 |
| 1 | 100K | R_0603_1608Metric | R2 |
| 2 | 4.7K | R_0402_1005Metric | R3, R4 |
IMU-Module design files
The KiCad project lives in the TomasD-git/IMU-Module repository on GitHub; these links point at the commit this page was built from.
IMU-Module: common questions
How big is the IMU-Module?
The IMU-Module measures 11 × 16.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IMU-Module?
14 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IMU-Module design files?
From the TomasD-git/IMU-Module repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IMU-Module design in my own project?
Yes, under the terms of its GPL-3.0 license, which TomasD-git chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956