Test rig
tombueng·LuxDMX·RDM/hardware/test_rig.kicad_pcb
About the Test rig PCB
Test rig is an open source ESP32 PCB design by tombueng, published on GitHub. It is a 2-layer board measuring 198.4 × 79.5 mm, with 13 components from 13 distinct parts.
Its main chip is the ESP32-S3-DEVKITC DUT (J1), from the ESP32 family.
It belongs with the iot & wireless, test & measurement and dev boards & breakouts designs in this gallery.
From the project
Open-source Art-Net / sACN (E1.31) → DMX512 gateway for ESP32 / ESP32-S3 / Ethernet. Live web UI shows all 512 channels in real time, flags console conflicts, and drives galvanically-isolated DMX. Flash from your browser, no toolchain.
KiCad project for the socketed carrier described in TESTRIGPCB.md. It holds the bench modules in female headers (sockets) so the rig is solid, no breadboard.
The board is generated from a script so the wiring is the source of truth and can't drift. buildtestrig.py places every part and assigns every net, then drops the parts in a staging grid, unplaced and unrouted on purpose so you do the layout by hand. The ratsnest shows every connection while you place, so it can't get miswired.
Test rig bill of materials (BOM)
13 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX485 SIM (L) | PinSocket_1x05_P2.54mm_Vertical | J_485A_L |
| 1 | MAX485 SIM A/B (R) | PinSocket_1x05_P2.54mm_Vertical | J_485A_R |
| 1 | MAX485 S3 (L) | PinSocket_1x05_P2.54mm_Vertical | J_485B_L |
| 1 | MAX485 S3 A/B (R) | PinSocket_1x05_P2.54mm_Vertical | J_485B_R |
| 1 | ESP32-S3-DEVKITC DUT (J1) | PinSocket_1x22_P2.54mm_Vertical | J_S3A |
| 1 | ESP32-S3-DEVKITC DUT (J3) | PinSocket_1x22_P2.54mm_Vertical | J_S3B |
| 1 | W5500 ETHERNET | PinSocket_2x05_P2.54mm_Vertical | J_W5500 |
| 1 | 270R BIAS 270R A->3V3 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | Rb1 |
| 1 | 270R BIAS 270R B->GND | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | Rb2 |
| 1 | 10K ADC-DIV 10k A->A1 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | Rd1 |
| 1 | 10K ADC-DIV 10k A1->GND | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | Rd2 |
| 1 | 10K ADC-DIV 10k B->A0 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | Rd3 |
| 1 | 10K ADC-DIV 10k A0->GND | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | Rd4 |
Test rig design files
The KiCad project lives in the tombueng/LuxDMX repository on GitHub; these links point at the commit this page was built from.
Test rig: common questions
What microcontroller does the Test rig use?
The Test rig is built around the ESP32-S3-DEVKITC DUT (J1), from the ESP32 family.
How big is the Test rig PCB?
The Test rig measures 198.4 × 79.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Test rig?
13 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Test rig design files?
From the tombueng/LuxDMX repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Test rig design in my own project?
The repository has no license, so all rights stay with tombueng. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Test rig without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in LuxDMX
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k