5 open source boards using the FM8002A
Real designs built with the FM8002A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Cz badge hardware
hackzone
100 × 110 mm161 parts2LNo license13ESP32
Tanmatsu hardware
Nicolai-Electronics
114.9 × 129.9 mm320 parts4LCERN-OHL-P-2.09ESP32
Why2025
ranzbak
114.9 × 129.9 mm327 parts4LNo license1RISC-V
BL706 Robot
tomrodinger
104.9 × 60.4 mm102 parts2LApache-2.00RP2040/RP2350
Media board
TheBadZhang
72 × 66 mm9 parts2LNo license1
How designs wire the FM8002A
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the FM8002A connects to, and the resistors, capacitors and other passives placed on it.
- The BYPASS pin has a capacitor to GND on 4 of 5 designs, most often 1 µF.
- The +IN pin has a capacitor to GND on 4 of 5 designs, most often 1 µF.
- The -IN pin has a series resistor on 4 of 5 designs, most often 10 kΩ (then 5.1 kΩ).
- The VO1 pin has a series resistor on 4 of 5 designs, most often 10 kΩ (then 20 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SHUTDOWNpin 1 | Connected to: Signal 60% · not connected 20% · GND 20% |
|
| BYPASSpin 2 | Connected to: Signal 80% · not connected 20% |
|
| +INpin 3 | Connected to: Signal 80% · not connected 20% |
|
| -INpin 4 | Connected to: Signal 80% · not connected 20% |
|
| VO1pin 5 | Connected to: A connector 60% |
|
| VDDpin 6 | Connected to: VCC 80% · not connected 20% |
|
| GNDpin 7 | Connected to: GND 80% · not connected 20% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Cz badge hardware by hackzone, Tanmatsu hardware by Nicolai-Electronics, Why2025 by ranzbak and Media board by TheBadZhang.
The FM8002A in open source designs
The gallery holds 5 open source boards using the FM8002A from 5 GitHub repositories; a typical one measures about 104.8 × 110 mm and carries around 161 components.
60% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Cz badge hardware by hackzone.
Parts used alongside the FM8002A
Microcontrollers on boards using the FM8002A
What boards using the FM8002A are built for
FM8002A: common questions
Where can I find a FM8002A reference design?
Each of the 5 boards on this page is a real design using the FM8002A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the FM8002A BYPASS pin connected?
The BYPASS pin has a capacitor to GND on 4 of 5 designs, most often 1 µF. Counted from the KiCad layouts of 5 open source designs using the FM8002A.
How is the FM8002A +IN pin connected?
The +IN pin has a capacitor to GND on 4 of 5 designs, most often 1 µF. Counted from the KiCad layouts of 5 open source designs using the FM8002A.
What resistor goes on the FM8002A -IN pin?
The -IN pin has a series resistor on 4 of 5 designs, most often 10 kΩ (then 5.1 kΩ). Counted from the KiCad layouts of 5 open source designs using the FM8002A.
What parts are used alongside the FM8002A?
The 74LVC2G02HD4-7, AP3032KTR, BMI270, BQ25895RTW and C426705 appear in the most repositories here.
Which microcontrollers do boards using the FM8002A use?
Most are built on ESP32 (3), RISC-V (1) and RP2040/RP2350 (1).
How big is a typical board using the FM8002A?
The median is 104.8 × 110 mm, and 60% are two-layer designs.
What is the most popular open source board using the FM8002A?
By GitHub stars, Cz badge hardware by hackzone, with 13 stars.
Can I simulate one of these boards using the FM8002A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.