Mcu hil

TomSawyerLabs·mcu-hil·reference/v1-import/v1.kicad_pcb

Mcu hil PCB layout, top view — open source AVR/Arduino board by TomSawyerLabs

About the Mcu hil PCB

Mcu hil is an open source AVR/Arduino PCB design by TomSawyerLabs, published on GitHub. It is a 2-layer board measuring 65 × 56 mm, with 65 components from 22 distinct parts.

Its main chip is the ATMEGA16U2-AU, from the AVR/Arduino family. Other key parts include the CAT24C32WI-GT3, 74LVC244APW,118 and 74AHCT1G126SE-7. By type, the board carries 33 resistors, 9 capacitors, 8 connectors, 6 transistors, 4 ICs and 4 diodes.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Hardware-in-the-loop boards: a Raspberry Pi (CM or HAT) that powers, programs and exercises real microcontrollers under test.

Hardware-in-the-loop boards for testing software against real microcontrollers. A Raspberry Pi (Compute Module or standard Pi) powers, programs, clocks, resets and talks to the microcontroller(s) on the board, so tests run against real silicon in a repeatable way.

AVRs come first (starting with the ATmega16U2 from v1). Other families (XMEGA, AVR32 UC3, and more later) get their own boards built from the same base design.

Main components on the Mcu hil

Mcu hil bill of materials (BOM)

65 components, 22 distinct parts.

QtyPartRefs
1
ATMEGA16U2-AU
U1
1
CAT24C32WI-GT3
U2
1
74LVC244APW,118
U3
1
74AHCT1G126SE-7
U4
4
2N7002,215
Q1, Q2, Q4A, Q4B
2
CJ2305
Q3A, Q3B
1
ABM3B-16.000MHZ-B2-T
X1
1
Harwin M20-7832046
J1
1
PPPC022LFBN-RC
J2
1
2-1761605-1
J3
1
30306-6002HB
J4
1
JUMPER
J5
2
USB4105-GF-A
J6A, J6B
1
10118193-0001LF
J7
4
LTST-C230KFKT
D1, D2, D3, D4
1
Capacitor 10 uF +/- 10% 16 V 0805
C1
5
Capacitor 100 nF +/-10% 50 V 0603
C2, C3, C7, C8, C9
1
Capacitor 1uF +/- 10% 16V 0603
C4
2
Capacitor 12pF +/-10% 50V 0402
C5, C6
2
Resistor 22R +/-1% 0603 100 mW
R1, R2
Show 2 more
QtyPartRefs
28
Resistor 1k +/-1% 0603 100 mW
R3, R4, R5, R6, R7, R8, R9, R10 +20
3
Resistor 120R +/-5 % 0603 0.1 W
R11, R13, R14

Mcu hil design files

The KiCad project lives in the TomSawyerLabs/mcu-hil repository on GitHub; these links point at the commit this page was built from.

Mcu hil: common questions

What microcontroller does the Mcu hil use?

The Mcu hil is built around the ATMEGA16U2-AU, from the AVR/Arduino family.

How big is the Mcu hil PCB?

The Mcu hil measures 65 × 56 mm, has 2 copper layers and is 1.59968 mm thick.

How many components are on the Mcu hil?

65 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Mcu hil design files?

From the TomSawyerLabs/mcu-hil repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Mcu hil design in my own project?

The repository has no license, so all rights stay with TomSawyerLabs. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Mcu hil without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards